Force10 Networking Scripts - Networking - Dell Community

Networking

Networking
Learn how to modernize & transform the network with the latest solutions from Dell Data Center, Campus and Wireless networking solutions.

Type Title Downloads Rating

ERPM Script

ZIP contains script and instructions.
Posted to: Force10 Networking Scripts
by 438

BMP 3.0 WhitePaper Scripts

This file contains all the scripts shown in BMP 3.0 WhitePaper
Posted to: Force10 Networking Scripts
by 768

Manipulate static IP route

The script demonstrates the ability to manipulate Static IP routes, in this case a default route (0.0...
Posted to: Force10 Networking Scripts
by 561

Ping Backup

This script runs from the switch and will try to ping a host and if it's able to do it will upload...
Posted to: Force10 Networking Scripts
by 457

ScriptServerSocket

Server implementation of receiving CLI commands from socket and execute the operation using FTOS...
Posted to: Force10 Networking Scripts
by 342

ScriptClient

Script to test ScriptServerSocket
Posted to: Force10 Networking Scripts
by 346

ScheduleBasedConfigChange

Introduction ------------ Script to run alternate setups for the day or evening. Each setup...
Posted to: Force10 Networking Scripts
by 385

putstats

This script takes the interface statistics from show int output on the switch then reformats them...
Posted to: Force10 Networking Scripts
by 412

putcore

This is a simple script that looks in the flash for core and trace files and uploads them to an...
Posted to: Force10 Networking Scripts
by 330

makecores

this script creates a few simple core files to test the putcore.pl script
Posted to: Force10 Networking Scripts
by 304

getmac

Usage is calling the script with an argument that is a mac address or partial mac address to search for...
Posted to: Force10 Networking Scripts
by 452

f10do

This script is a simple command line wrapper for executing ftos cli commands on a specified switch. ...
Posted to: Force10 Networking Scripts
by 403

DisplayAlarms

This script displays the list of alarms generated in last one hour. The output is stored in a file...
Posted to: Force10 Networking Scripts
by 286

Cron

This is a clone of the well-known cron job scheduler for the unix flavored operating systems. It...
Posted to: Force10 Networking Scripts
by 302

ConfigDiff.py

This is a demo script to exhibit the scripting capabilities of the chassis. This script displays...
Posted to: Force10 Networking Scripts
by 304

cmd-server

This script runs on the switch and listens for incoming telnet requests on a port ..... when you telnet...
Posted to: Force10 Networking Scripts
by 372

default-int

Restore an interface configuration to its default settings. It removes the interface config as well as...
Posted to: Force10 Networking Scripts
by 312

Uplink Failure detection

This script detects uplink failures and shutdown downlinks to force and ensure dual-home servers failover...
Posted to: Force10 Networking Scripts
by 507