FN IOMs include the Dell PowerEdge FN410S, FN410T, and FN2210S in the PowerEdge FX2 chassis.

This deployment guide provides configuration examples for common upstream switches to establish a functional uplink and bring up the network ports on PowerEdge FC-Series servers (FC830, FC630, etc.) in three easy steps:
1. Ensure the FN IOM is at its factory default settings.
2. Create an LACP port channel on the upstream switch.
3. Verify that connected FN IOM ports are up.

This guide also provides instructions for accessing the FNIOM's CLI and GUI interfaces.

http://en.community.dell.com/techcenter/networking/m/networking_files/20442084