USB stick not recognised in one-time bootmenu D90D7 - Wyse and Windows Embedded Standard (WES7, WE8S) - Wyse Thin Clients - Dell Community

USB stick not recognised in one-time bootmenu D90D7

USB stick not recognised in one-time bootmenu D90D7

  • Smile USB stick not recognised in one-time bootmenu D90D7

    Hello everybody   ,

    Today I was trying to pull the firmware of the D90D7 with a USB stick, configured with the "Wyse USB Firmware Tool", but my USB stick was not recognised in the one-time boot menu.

    So I went into the BIOS and there I saw an option called "Boot from USB", which is "disabled". You have change this setting to "enabled". Restart your machine and go to one-time bootmenu by pressing "p" during boot.

    Hopefully this helped some of you guys 

    Greets

    Patrick

  • The D Class device have a BIOS option to "Boot from USB" which is Disabled by default. To enable, follow these steps:
    1- Power the D90D7 on while holding the Delete key
    2- Enter the password when prompted (Fireport)
    3- Select the "Advanced" tab
    4- Using the down arrow key, select the "Boot From USB" option, press Enter and Select "Enabled"
    5- Press the F10 key and save your configuration.

     

     


    Roger Montalvo 
    Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
    Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
    [SIGPIC][/SIGPIC]

  • Thanks! that worked for me.