Wyse USB Firmware Tool 1.16 will not allow image for D90D7 to be mounted. - Wyse and Windows Embedded Standard (WES7, WE8S) - Wyse Thin Clients - Dell Community

Wyse USB Firmware Tool 1.16 will not allow image for D90D7 to be mounted.

Wyse USB Firmware Tool 1.16 will not allow image for D90D7 to be mounted.

This question is not answered

Wyse USB Firmware Tool 1.16 will not allow image for D90D7 to be mounted.

I downloaded DBD0 837 4096.exe to mount onto a usb with the firmware tool.
When I try to run the Wyse USB Firmware Tool 1.16, it gets to the point where you select the file to mount and this error message comes up.
"Invalid rsp file for the OS type selected. Please select compatible rsp file."
There should not be an issue because I am selecting Windows Embedded Standard 7.
If someone could give me some things to try i would be grateful.

All Replies
  • you need to know in front what kind of os you have 32b or 64b. the image is written on the ssd complete. mounting is done automatic bij windows and bios. Enter bios with "Fireport" and select the right hdd to start on port 0.