Current Driver CAB Summary
Driver CABs Homepage | Understanding Delta Report
Delta Report for Previous Driver CAB v/s Current Driver CAB
(81V6G-A10-07/11/2017) v/s (D3J11-A11-10/10/2017)
Realtek High-Definition Audio Driver
Realtek PCI-E Memory Card Reader Driver
ST Microelectronics Accelerometer Driver for Free Fall Data Protection
Intel USB 3.0/3.1 eXtensible Host Controller Driver
Intel USB 3.1 eXtensible Host Controller and Hub Driver
Intel(R) Thunderbolt(TM) Controller Driver
Intel Dynamic Platform and Thermal Framework
Intel Chipset Device Software
Intel(R) Management Engine Components Installer
Dell Wireless 5811e LTE Mobile Broadband Driver and GPS Driver
ASIX USB to Serial / Parallel Port Driver
Realtek USB Audio Driver
Realtek USB GBE Ethernet Controller Driver
ASMedia USB 3.0 Extended Host Controller Driver
Dell Multi-Touch Touchpad Driver
Intel 18260/17265/8260/7265/7260/3165 Bluetooth Driver
Intel 18260/17265/8260/7265/3165 WiFi Driver
Intel I2xx/825xx Gigabit Ethernet Network Controller Drivers
Dell WLAN HotKey Driver
Qualcomm QCA61x4A QCA9377 WiFi Bluetooth Driver
Intel 17265/18260 WiGig Application
Dell Data Protection | Hardware Crypto Accelerator (Network and Computing Encryption/Decryption Controller) Device Driver
Dell ControlVault2 Driver and Firmware
Intel Rapid Storage Technology Driver and Management Console
AMD Radeon R7 M360 / M370 Graphic Driver
Intel HD Graphics 500 P500 600 P600 series Driver
Intel 8265/8260/18265/18260 Bluetooth Driver
Intel HD Graphics 500 P500 series Driver
I've downloaded version A02 and imported into my MDT system, although when I try and boot on a new E5570 it says I am missing the Ethernet Driver. If I boot into the pre installed machine it show a Ethernet card Intel l219-LM version 220.127.116.11. Any suggestions?
I ended up having to use the latest driver that is on the Intel website to get it to connect to the MDT server.
The download link is dead, I'm getting a 404 error.
Also 404 error for me.
Help Please!!! I booted the machine with WDS and it built fine. I updated the BIOS and now it won't boot. I try to rebuild the box and the deployment keeps failing saying Missing Storage Driver. I just built this. How did a BIOS update lose a storage driver? I can't build from the Windows 7 disk either.
USB Controller bluecreening E5570 x64 W7 in our MDT.
iusb3xhc.sys - Address FFFFF88006D1568C base at FFFFF88006cc7000 DateStamp 557ed8fd
Pulling out the USB controller fixes the issue but USB devices lock the PC up because of the lack of USB controller drivers. We are forced to manually run the drivers provided by the main Dell Support driver page for E5570. I do not see a difference between .inf files. Is anyone else experiencing similar issues?
We are also having BSOD and WIndows Startup Repair prompts using this CAB for our MDT server.
After imaging, I tried to deploy but was immediately prompted that windows needs to do a startup repair. No USB peripherals were being recognized (mouse/keyboard) while docked. Reimaging yielded same results. Dell Command Updates did not help and I'm being prompted to install the same BIOS over and over again.
Any update to this CAB? Still BSOD and lack of USB support
Cali Duck, Replace the included Intel USB 3.0 eXtensible Host Controller Driver' with release A03 (april 26th) and most of your issues should be resolved; ran into the same things. As a side note, i did flash the bios to A06 / 1.5.0.
I do however still get a 'igfxHK Module stopped working' error when logging on, probably need to replace the intel gfx driver as well.
The igfxHK issue can be resolved by replacing the 'Intel HD, 5300, 5500, 6000, 515, 520, 530, P530, Iris 540 Graphics Driver' with release A01 (April 13th)
Yea at this point, we image using the CAB here, then install the following manually from support.dell.com: 1) Chipset 2) USB 3.0 3) BIOS 4) All available drivers from Intel Driver Update utility
Of note - the TPM driver does not allow for BitLocker within Windows 7 64bit Enterprise, it may be incompatible
User is now complaining of blank screen issues...great
Actually, TPM is working for me, altho i do need to mention that i had to clear, disable and enable the tpm chip before the device was even visible in windows.