we have Dell Blade Server M1000e, 13 Servers 3 full height and 10 half height, I/O switches are A1,A2 B1B2 are MXL Blade switches and C1,C2 are Brocade Fiber switches.
half height servers are PowerEdge M630 Blade Server
with 1. QLogic 57810-k Dual port 10Gb
2.QLogic 57810-k Dual port 10Gb KR CNA Mezz Card for M-Series Blades
3. Emulex LPM16002 16Gbps Fibre Channel I/O Card
and the Full height is PowerEdge M820, Blade Server
with 1.Broadcom 57810-k Dual port 10Gb KR
2.Emulex LPM16002 16Gbps Fibre Channel I/O Card
the Problem is at the first startup we got this message for full height servers only
"A fabric mismatch detected for mezzanine card B1 Dell Blade"
and the full height servers only cannot power on they keep red blinking
what is the issue?