The operating system that is pre-loaded on my Dell Inspiron 7520 (a.ka. Inspiron 15R Special Edition) is Microsoft Windows 7 Home Premium. I have a retail version of Microsoft Windows 7 Ultimate and wish to do a clean install on my laptop PC.
My laptop was able to boot up from the retail disk.
After clicking "Install Now" and accepting the terms and conditions of Microsoft Windows 7 Ultimate, I checked the box "Custom (advanced" setup in which a new copy of Windows would be installed. The next screen that popped up contained the following bizzare message: No drives were found. Click Load Driver to provide a mass storage driver for installation".
Could someone tell me where and how to locate the mass storage driver?
I downloaded the driver, changed BIOS to Intel SRT, rebooted the machine and ran Win7 setup. When the prompt "No drives were found. Click Load Driver to provide a mass storage driver for installation", I inserted a USB flash drive with the driver.
Win7 setup took about 20 seconds to install the driver and then ...
NOTHING! Win7 still could not find the hard drive.
I cannot believe that it is this frickin' difficult. Can you pass on this query to someone who designed this system and request them to publish definitive instructions and the correct frickin' drivers PLEASE. This is VERY frustrating!
Welcome to the Community,
Access System Setup(BIOS) by pressing <F2> at start up (Dell logo). On System Set up screen under Main look for Fixed HDD and see if its getting detected.Than go to advanced tab on the top,check for SATA operation and see if its set to Intel Smart Response Technology.
If you don't see the above settings,restore BIOS to default settings by pressing F9 and than press F10 to save and exit.
Than try reinstalling the Windows again and see if it works.
Let me know if you need more help.
Dell | Social Media Outreach | Global Social Media & Community
I wanted to install Windows 7 Ultimate on my Inspiron SE (with SSD). So I ran Win7 setup in the usual method, but found that setup couldn't find the HDD. So in BIOS, I (maybe stupidly) changed the SATA Operation option (under "Advance") from Intel Smart Response Technology to ATA, then re-ran setup. This was successful and I was able to successfully install Win7 Ultimate (except that Win7 doesn't have wireless drivers that work with the Inspiron SE). I then went back into BIOS, changed from ATA back to Intel SRT and rebooted. And .....
If I change back to ATA in BIOS, no problems – the PC boots fine. But BSOD if I change to Intel SRT and reboot.
Anyone have any idea what I can do to re-enable Intel SRT successfully? Am I doing something stupid?
Go to www.support.dell.com,Drivers and Downloads,Enter service tag number and select operating system.It will give you the list of drivers.Install the Chipset drivers and see if it helps to fix the bluescreen.Than install the other drivers including the wireless card driver (network).
No, it blue screens during windows loading - I can't load any drivers.
On another forum, I've been told that, to install a different version of Windows 7, I have to :
".... put the HDD in RAID(SRT) mode in BIOS. Then unplug the mSATA SSD (it's easily located in the manual) so Windows doesnt copy any system files to it.
Reconnect it after Windows is installed & activate SRT using Intels software which you can download the latest drivers from their site."
I've tried everything else, so I want to give this a go.
My question is, where the hell is the mSATA SSD? The manual I downloaded from the Dell website DOES NOT MENTION it!!! Ridiculous! I know my 15R SE has one, because BIOS reports a 32GB mSATA SSD.
Can someone tell me where I can find the mSATA SSD, please.
From your reply it seems that you have not had direct personal experience in handling Dell Inspiron 15R SE machines.
The moment you switch, under BIOS --> SATA Operation, from "Intel Smart Response" to "AHCI", there is a strong possibility that you lose all the OS and all its data and applications installed on it.
What is the name of the "other" forum? Perhaps we can find a better solution there.
The "other" forum is www.whirlpool.net.au.
Unfortunately, beyond what I posted earlier, it has not helped me either.
I can't believe that the manual for the 15R SE DOESN'T have anything about the mSATA. The manual for the 17R SE does, but it's internal layout is very different to the 15R.
Does anyone on this forum know how to get physical access to the mSATA SSD onboard the Dell 15R SE (Dell Inspiron 7520)?
Click the following link to download the owner's manual for Dell Inspiron 15R: rapidshare.com/.../Dell_Inspiron_15R_SE_owner_s_manual.pdf
According to Dell Support, the configuration of 15R SE is similar to 15R. The mSATA card is known as the "daughter card" in the manual.
If I were you I would hesitate to remove/disable the daughter card as it involves removing the display screen and many other pieces of hardware. It is buried deep inside the laptop.
First download this driver, www.dell.com/.../DriverFileFormats on to a CD or USB flash drive.
Than after setting the BIOS to default,that is keeping the SATA operation as Intel Smart Response Technology.Try reinstalling windows using Windows DVD,when you get this prompt "No drives were found. Click Load Driver to provide a mass storage driver for installation" try inserting the Cd or USB flash drive with the above driver.
Let me know if it lets you install this driver and further lets you install the Windows.
Could you get any Dell technical support person who is directly responsbible for configuring and pre-installing Microsoft Windows 7 on Dell Inspiron 15R Special Edition (a.k.a. Inspiron 7520) to answer our questions on this forum?
I think it is more productive and cost-savings for Dell in the long run.
Roshan,The file referenced by your link above contains, inter alia, 2 folders one of which is called 10.8_f6flpy-x64. It is this folder that contains the so-called device drivers that can be used for pre-installing Windows 7.But I have to let you know that before and during the setup of Windows 7, all the USB ports are rendered non-functional. They do not respond when a USB drive is inserted into any of them. Only the DVD drive is working.
Hi carlmary, Hi Roshan,
Once the SATA Operation has been set to "Intel Smart Response Technology" in the BIOS and the laptop is booted into the Windows 7 setup environment, all USB 3.0 ports lose their functionality, ie. they do not work.
Roshan, could you please get any Dell technical support person to provide us with the necessary USB 3.0 device drivers that are required for loading into a Windows 7 pre-installation setup.
What I did was to burn the device drivers extracted from 10.8_f6flpy-x65 folder into my retail copy of Microsoft Windows 7 Ultimate. The reason is that only the DVD drive, the hard disk drive and the mSATA disk are visible during the Windows 7 setup.
During Windows 7 setup, immediately after accepting Microsoft's license agreement, you are presented with a menu showing the available partitions on your hard drive(s). In our case, it is blank.
Click on "Browse" button to locate the Windows 7 DVD and then click "OK".
The name of the device driver "Intel Mobile Express Chipset SATA RAID Controller (D:\iaStor.inf)" will appear in the menu. Click "Next".
Your laptop will try to load it many times. It seems there is something that prevents it from loading. If you encounter the following message "Intel Mobile Express Chipset SATA RAID Controller (D:\iaStor.inf) device driver could not be installed. Contact your vendor for an updated driver" do not be disheartened. Continue to click "Rescan" as many times as necessary. After a few attempts, the menu refreshes and a list of available partitions on your hard disk drive(s) appears.
Proceed as usual with your installation of Windows 7.