Booting a PowerEdge R300 (no CD/DVD drive) through Network

Servers

Servers
Information and ideas on Dell PowerEdge rack, tower and blade server solutions.

Booting a PowerEdge R300 (no CD/DVD drive) through Network

This question is not answered

I need a procedure to be able to boot a PowerEdge R300 server through network to install an OS on the hard drive.  There is no CD or DVD drive on the server and no OS is currently installed.

Thanks.

All Replies
  • You'll need to set up a PXE boot server and then set one of the NICs on the server to support PXE boot (can be set in the bios of the server).

     

    You'll want to Google for PXE boot.

     

    As you're asking about how to do this it would seem you're completely unfamiliar with PXE booting. The time and effort you'll spend on setting it up is probably more costly than to just go out and buy an optical drive (either an internal one or a USB version).

     

    There's always the option to use the virtual media capabilities of the DRAC if you have a DRAC in the server.

    Member since 2003