PERC 5/i and SAS 5/iR - what is maximum disk (SATA) capacity supported by this controllers?

Servers

Servers
Information and ideas on Dell PowerEdge rack, tower and blade server solutions.

PERC 5/i and SAS 5/iR - what is maximum disk (SATA) capacity supported by this controllers?

This question is not answered

Hello,

PERC 5/i and SAS 5/iR - what is maximum disk (SATA) capacity supported by this controllers?

Thanks

All Replies
  • PERC 5/i if intergrated doesnt support SATA. if it is the Adapter card then yes it will support SATA. as for the capacity of the drive, i think it will support any size up to 2TB

    SAS 5/iR supports both drives SAS and  SATA and the same issue with the 2TB drive size.....

    ~Siget

  • All PERC 5 controllers (Integrated and Adapter) support both SAS and SATA HDDs (the above post is not accurate).

    Currently standard HDDs have 512byte sectors and x86 architecture can map up to 32 bit addresses (2^32).

     512 * (2^32) = 2.2*10^12bytes = 2.2 TB, that is where compatibility problems may start.

    The actual capacity of 2TB SATA HDD that hit the market recently is actually about 1.8 or 1.9 TB; lower than the 2.2TB critical capacity

  • So Dell PowerEdge 860 with SAS 5i/R internal controller will support configuration RAID1 (2*1TB) = 1TB  or RAID1 (2*2TB) = 2TB ?