USB 3.0 Card

Servers

Servers
Information and ideas on Dell PowerEdge rack, tower and blade server solutions.

USB 3.0 Card

This question is not answered

Hi all. I have a Dell Poweredge 1800 and a Dell PowerEdge T300 an di want to put a usb 3.0 card in each one but the ones I purchased do not fit. I bought a USB 3.0 PCI-Express card, but after opening up the units there are no slots that match the card. Can someone please help me with this? The cards I bought are not very long at all and the ports on the mother board are longer. What do I need for these to work?

 

Did I buy the wrong thing? Can someone send me a link to an ebay usb 3.0 card that would work in both servers so I can see where I messed up. This i s what I bought.

http://www.ebay.com/itm/USB-3-0-4-Port-PCI-Express-PCI-E-Card-Super-Speed-5Gbps-w-4-Pin-Power-Cable-New-/170783215936?pt=US_Internal_Port_Expansion_Cards&hash=item27c3791140

ANy help is appreciated. Thank You

 

All Replies
  • Hello SHOWMECOMPUTERSERVICES

    That card will not work in the 1800 or T300. That is a PCI express x16 2.0 or 2.1 card. You do not have an x16 slot in the 1800. You need something that is compatible with one of the slots you have:

    Slots on 1800:

    PCI-X ,100 MHz
    PCI 32 bit, 33 MHz
    PCI 64 bit, 66 MHz
    PCIe x4
    PCIe x8

    Slots on T300:

    PCI-X, 64/133
    PCIe x8
    PCIe x4

    There is not a USB 3.0 card we have validated for the server, so even if you find one that is compatible with the slot you may still have issues getting it to function. I would suggest using this wiki article as a reference for PCI express and understanding which architecture will be compatible with your servers.

    http://en.wikipedia.org/wiki/PCI_Express

    Thanks

    Daniel Mysinger

    Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device! (iOS, Android, Windows)

  • So there is no way to get a card that will work in the server? How can I get it to 3.0 ports?

  • ShowMeComputerServices

    So there is no way to get a card that will work in the server? How can I get it to 3.0 ports?

    I'm not saying there is not a way. I don't have a recommendation for a card because we have not validated one to work. If you cannot locate someone that has already tested a card to function in the server then it will be trial and error.

    Thanks

    Daniel Mysinger

    Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device! (iOS, Android, Windows)

  • I understand that I was just wondering of someone could send a Link to a card that could fit into the slots and I will try it but all the ones that I have found are all short in length like the one I posted.

  • Sorry ... confused ... the description states x16, but the picture is clearly of an x1 card.

    This "should" work in ANY PCIe slot (MUST be PCIe!) ... the slot may be longer than the card, but that is by design of the PCIe specification - any card that fits will work.  That is just the physical spec, however ... there may be resource issues or other incompatibilities (going back to our discussion on server vs. desktop) that may prevent it from working at all.  According to Daniel's post, both systems have PCIe slots ... make sure you have the PCIe slots, then put the card in it ... again, it will not fill the entire slot, but will work just the same.

  •  

    T300

     

  • Just wanted to say than you theflash, I put the card into the slot even though it didn't fill up the slot and u was right, it worked perfectly and now I have 3.0 USB on the server.

    Question for you, if you was going to use one of these servers for a desktop pc would use the 1800 dual 3.6 ghz with 12 gig ram or the T300 quad core 2.66 ghz with 12 gig ram?

  • I would choose the T300 ... it is newer, looks nicer :), and given that I would need better resources for virtualization on my system, the Quad-Core with VT would be a "must-have" for me.  I realize that you said you weren't getting the performance from the T300 that you wanted, so that should play into YOUR decision too - if you don't need what the T300 has and/or don't want to troubleshoot the poor performance, then go with the 1800.  :)

  • You stated that you would go with the T300 with quad core with vt, what does vt mean? I know nothing about these servers..

  • VT stands for Virtualization Technology (hardware-assisted virtualization).  It is not solely a server technology - most modern processors have this technology.  This is beneficial - even required - for virtualization in today's applications.  Virtualization, to over-simplify it, is to run other "virtual" computers inside of a host computer - VT uses hardware to help optimize and improve performance of these "virtual machines".