PowerEdge 2950 E171F PCIE Fatal Err B0 D6 F0

Servers

Servers
Information and ideas on Dell PowerEdge rack, tower and blade server solutions.

PowerEdge 2950 E171F PCIE Fatal Err B0 D6 F0

  • My dell poweredge server gives me an error of E171F PCIE Fatal Err B0 D6 F0.  Cannot find a solution for this.  I will appreciate any help figuring out how to solve this problem. 
  • This may be difficult to isolate, but as a start, what type of adapters do you have plugged into the slots?
  • Hello Richard,

    I have a 2950 with the same issue.  Did you ever locate a solution for this problem.  We have 2 Telephone interface cards installed in our 2950.  One is a Sangoma 4 Port Analog (FXO) card.  The other is a one port PRI (T1) Interface.

     

    Thanks,

    Peter T.

  • Do you only get the failure when both cards are installed? Have you tried running only one card at a time?

  • Thanks for te reply.  Never had only 1 card installed -- will check that out and get back here.  FYI - this message stopped appearing for a while, not sure exactly how long.  I just noticed it again yesterday. 

  • also, additional error data from display:

    E1711 PCI PERR B14 D0 F2

  • try updating the drivers and firmware for those cards

  • Also try replacing the board or if you can solder simply replace the capacitors.