* Power the monitor off
* Disconnect all cabling from the bottom and/or sides of the monitor (especially the power cord)
* Press and hold the monitor power button down for 5 seconds
* Reconnect only the monitor power cord and either the #1 blue VGA or #2 white DVI (not both from one video card)
* Power the monitor on
* The PC should already be on. The monitor should auto sense the #1 blue VGA or #2 white DVI. If it does not, press the Input Select button and change to #1 VGA or #2 DVI

Run this free application to restore the Monitor Factory Defaults
* Click Here
* On the left by the disk icon, click sofMCCS
* Click Run
* If asked, click Run again
* Click OK
* Check I agree...
* Click Next
* Click Start
* Click OK
* From your desktop, double-click the softMCCS icon
* Scroll down to Preset operations
* By Restore factory defaults, click the green Restore arrow
* The display will black out and then return
* By Restore factory lumunace/contrast defaults, click the green Restore arrow
* By Restore factory color defaults, click the green Restore arrow
* Close the softMCCS box
* Click No to KEEP your changes
=====

2707, 2407, 2007
* Press the Menu button
* Press plus or minus to move to Menu Settings
* Press the Menu button
* Press plus or minus to move to Factory Reset
* Press the Menu button twice to Reset
* Press plus or minus to move to Exit Menu
* Press the Menu button

All others -
* Press the Menu button
* Press plus or minus to move to Factory Reset
* Press the Menu button
* Press plus or minus to move to All Settings
* Press the Menu button
=====

Monitor Power Reset
* Power off the monitor
* Disconnect all cabling from the bottom and/or sides of the monitor (especially the power cord)
* Press and hold the monitor power button down for 5 seconds
* Reconnect only the power cord and either the #1 blue VGA or #2 white DVI (not both to one video card)
* Power the monitor on
* The PC should already be on. The monitor should auto sense the #1 blue VGA or #2 white DVI. If it does not, press the Input Select button and change to #1 VGA or #2 DVI
=====

Console to component
* Power off the monitor
* Power off the console
* Disconnect all cabling from the bottom and/or sides of the monitor (especially the power cord)
* Press and hold the monitor power button down for 5 seconds
* Reconnect the game console to the monitor component
* Reconnect the power cord to the monitor
* Power on the game console
* Power on the monitor
* Press the monitor Input button and switch to #5 Component
=====

Console to VGA
* Power off the monitor
* Power off the console
* Disconnect all cabling from the bottom and/or sides of the monitor (especially the power cord)
* Press and hold the monitor power button down for 5 seconds
* Reconnect the game console to the monitor VGA
* Reconnect the power cord to the monitor
* Power on the game console
* Power on the monitor
* Press the monitor Input button and switch to #1 VGA
=====

Console to DVI
* Power off the monitor
* Power off the console
* Disconnect all cabling from the bottom and/or sides of the monitor (especially the power cord)
* Press and hold the monitor power button down for 5 seconds
* Reconnect the game console to the monitor DVI
* Reconnect the power cord to the monitor
* Power on the game console
* Power on the monitor
* Press the monitor Input button and switch to #2 DVI