Resetting the maintenance count on a Dell Printer Model 3330dn

Peripherals

Peripherals
Dell Monitors, Printers, Projectors, Hardware and Software discussion

Resetting the maintenance count on a Dell Printer Model 3330dn

This question is not answered

I need to know how to reset the maintenance count on a Dell Printer Model 3330dn. Heading out today to replace the fuser. Thank you

All Replies
  • Hi dominionitsolutions,

    Below are the following steps to reset the maintenance count on a Dell printer model 3330dn.

    1Turn off the printer.
    2. Press and hold (check) and (right arrow).
    3. Turn on the printer.
    4. Release the buttons when performing Self-Test displays.
    The message CONFIG MENU displays on the top line of the operator panel.
    5. Select Reset Maintenance Count from the Configuration menu.
    6. The message Reset Maint Cnt=Reset displays momentarily. Press (check) to reset.
    When the reset operation is complete, the menu returns to the Printer Setup Reset
    Maintenance Count Screen. Scroll down to the Exit Configuration Menu and Press
    Select to Return to Ready status.

     Please do get back to us on any further assistance.

     

    Thanks and Regards,
    Nikhil M
    #iworkfordell

  • How many pages does the 3330 print before needing the fuser replaced?

  • Hi billfoltz01,

    You don’t need to replace a fuser until it goes bad. Usually it will last for a couple of years.

    You will be able to print more than 100000 to 200000 pages.

    Please do get back to us on further assistance or information.

     

    Thanks and Regards,
    Nikhil M
    #iworkfordell