Disconnect your printer. Download and run this patch. It will remove the printer completely from your computer. Restart your computer.
Now go to drivers and downloads/select product/printers/select your printer. Download drivers and firmware.
Install your printer drivers. You'll be prompted when to connect it.
Then install the firmware.
Scanning using USB connection, open the Dell All-In-One Center, click on scanning and copying and scan from there.
Scanning wirelessly, use the scan buttons on the printer.
What is a Dell Service Tag and how do I locate it?
Original poster, If you have solved your problem, can you please mark the correct thread(s) with your solution. Thanks
Welcome to Dell Community!
#MicrosoftMVP - Windows Expert-Consumer April 1, 2012 to March 31, 2015
Fortunately, Pudgyone's solution worked. I downloaded the patch and uninstalled my old driver. I reinstalled the new driver from the website and now the scanner works. However, if I want to scan and fax, the fax doesn't work. It's like the computer doesn't recognize the fax part. I don't want to redo everything again so I am able to fax from the AIO itself. Just use it like a regular fax, put the paper on the glass and type in the number. If you want to scan something and send, do it separately. Hopefully, it will work itself out eventually.
Download and install the proper drivers. The Dell All-In-One Center is in the drivers package.
Vista 32-bit Drivers
You'll be prompted when to connect it.
Now install the firmware.
Let's clear up the information first. Since you didn't create your own post, it can sometimes get confusing.
You have a new Dell XPS M1530. XP or Vista? 32-bit or 64-bit? 32 is normal 64-bit is special. So there are drivers for the 964, which I hope is the printer you're using, and can be installed on 2000, XP and Vista 32-bit only.
How are you connect to the printer? USB connection or using a Dell wireless print adapter 3300 or a print server with your wireless router?
If using a wireless router, make and model and type of security you're using.
Disconnect the USB Cable from the printer. Download and run this patch. It will completely remove the printer from your computer. Restart your computer.
Download and install the Vista 32-bit drivers, do NOT use the disk to install the drivers. You'll be prompted when to connect the USB Cable to your computer.(Powered on)
Download and install the firmware for the 964 printer.
Everything should work. If it doesn't then you may have a USB problem, which there is a solution for this, also.
Hi, I found this trail when searching for answer for same problem.
Got a new computer sent to me by my work: IBM Lenovo Thinkpad T400.Windows Vista Enterprise. 2007. Service Pack 1. 32bit.
Need to make it work with the Dell Photo 964 that i have, so the issue is on me :) and can't ask my work IT support. I followed the instructions above closely. 5 times. First time I did not notice the link automatically shows as XP and so that's what i downloaded. With that attempt, the printer worked, but the All in one scanning program did not. I started over and removed everything. Selected Vista. Passed on printing test page. All in one loaded. Thought i was golden. But now won't print and still won't scan. Says no communication between computer and 964 and to make sure it's on, cables plugged in etc (which all is good there). I started over 2 more times thinking i missed something, but still the same result. Last attempt I disabled whatever firewall I have and that didn't help either. So I have the print driver installed and i have the all in one program installed at this point, but no communication between laptop and the 964. Any ideas? I thought of calling geeksquad but they probably cost more than me just craiglisting the 964 and buying something new and compatible. I'd like to avoid the spend though!
Thank you! (Oh, and I am not very technical, so please talk slow!)
You need to disconnect the printer, download and run the patch(printer cleanup utility) until it prompts you to restart your computer.
Restart your computer. Download the proper Vista drivers. You'll get a message, then printer is not connected. Connect the printer at this time(powered on)
The link to the patch and the Vista drivers can be found at...
964 Photo All-In-One Printer owners thread (W7)
Let me know what happens.