Powerconnect 5324 - Saving startup config

Network Switches

Network Switches
Information and ideas on Dell PowerConnect network switch solutions.

Powerconnect 5324 - Saving startup config

  • Hi
     
    I am trying to save my startup config as per the manual which is done by the following
     
    copy running-config startup-config.
     
    I get the following error "Copy: The flash is full - could not create destination file"
     
    If I try "copy running-config startup." is seems to save and if I power the switch off it boots with the correct details.  I did this once on a 5312 and again had to save to "startup" rather than startup-config as it didn't like "startup-config".
     
    Can anyone help on this.
  • I have attempted to create your issue to no avail.  If possible, please post the output from the command -- show run -- as the configuration I created may not have been enough to generate the error.
  • Hi

    The full details are

    Copy: The flash is full - could not create destination file

    console# 01-jan-2000 01:16:41 XCOPY-W-TRAP: The copy operation failed

    Thanks

  • Hi

    Apologies, that should be %COPY-W-TRAP not XCOPY-W-TRAP

    Thanks