Enabling jumbo frames in Broadcom NetXtreme 57xx on Dell Precision M6500

Networking, Internet, Wireless

Networking, Internet, Wireless
From Wi-Fi to wired Ethernet, mobile broadband to modems: it's all spoken here.

Enabling jumbo frames in Broadcom NetXtreme 57xx on Dell Precision M6500

This question is not answered

I am using a Dell Precision 6500 running Windows XP-sp2 to stream data to a FPGA board at a high data rate of 750 Mbps on a direct link.

FPGA ethernet is capable of supporting the required throughput, but the bottleneck is on Laptop side. I am njot able to get more than 450 Mbps throughput.

I thought of enabling the jumbo frames in NIC to increase throughput, but can't find any option to do so in the NIC driver.

Can anyone please tell me how to enable jumbo frames in Broadcom NetXtreme 57xx Gigabit Controller?

Or is there any other way to increase the throughput.

Thanks,

-Harsh

 

All Replies
  • I know that on servers, the OS native (Microsoft) drivers don't support jumbo frames. If you're using Microsoft drivers, I'd suggest to upgrade the drivers to Dell's Broadcom drivers and see if they'll allow jumbo frames. Otherwise it may just be that the NIC in this laptop doesn't support jumbo frames (not exactly a feature that a laptop would need/use all that often).

    Member since 2003

  • Thanks for the reply.

    The very need for high UDP throughput made me use a high end laptop like Dell M6500.

    Jumbo frames is one option i would like to try to increase the throughput, but if u have any other way of doing so, please suggest. I hv already tried increasing the socket buffer size and UDP buffer size, but that wont help after 450 mbps.

    My desired data rate is around 750 mbps.

    Thanks in advance.