Turns out that my Dell XPS M1530 laptop got a virus, so to solve this I re-installed Windows (Vista Home Premium) and as a result, all of my files, drivers and software have all been deleted. I have re-installed almost everything I need, except one vital thing. The Wireless Network Adapter.
I have used all the network drivers on my Dell Driver disc and none of them have seemed to work, luckily I have a spare computer so I can ask you all this and I have looked all over the internet for driver download, none of them have worked. I looked around and it seems to be quite a common problem when people advance OS' and I suppose I have been in the same situation, But no drivers seem to work!
Does anyone have any advice or download links to help me then that would be great. Thanks
Extra Information: Brodcom 802.11n Network Adapter
Device Status: This device cannot start (Code 10)
I have an Inspiron 1720 with the same problem after reinstalling Vista Home Premium....code 10...wireless adapter cannot start.
Device Manager showed "Broadcom 802.11n Network Adapter"
Driver Details showed a Microsoft Driver with an older date. I believe the version was 22.214.171.124
PROBLEM: This is not the correct driver!!! You need a Dell driver ... not a MS driver! The default MS driver was installed.
I found a folder with the correct driver at C:\drivers\network\R151522 on my hard drive.
I used the Device Manager "Update Driver" option and pointed to that folder....success!
Device Manager now shows "Dell Wireless 1505 Draft 802.11n WLAN Mini-Card" under Network Adapters. I can see my wireless networks again!
Note: The folder may have been created while I was using the "Utilities" CD during my recovery.
Good Luck to all
my Dells:Precision M6300 - XP SP3 / Windows 7 / Ubuntu 12.04Latitude D620 - XP Pro SP3Precision M6300 - Windows 7
Thanks for the link, however the only driver that I think is the right one keeps saying "The operating system is not supported. The software will not be installed."
So I seem to have a problem.
Try running Finding System Information. At the bottom you'll see your network adapters. Post the network adapters here along with the make and model of your computer and operating system.
What is a Dell Service Tag and how do I locate it?
Original poster, If you have solved your problem, can you please mark the correct thread(s) with your solution. Thanks
Welcome to Dell Community!
Hello, I'm having the same problem. (Code 10 - cannot start) on a Broadcom NetXtreme Gigabit Ethernet Controller, BCM5761E. I've tried the drivers from the Broadcom site (b57nd60a) and from Dell.com (file R239885.exe), same result, cannot start. I'm on a Dell Precision M6400 Laptop running Windows Vista 64. I haven't reinstalled Windows, it used to work fine, I don't know what happened.
Here is the device instance path: PCI\VEN_14E4&DEV_1680&SUBSYS_168014E4&REV_10\4&15B2C2F&0&00E5
The problem is intermittent, sometimes it works, most of the time it doesn't. I'm currently using wireless to access the internet. I communicated briefly with Broadcom support, but they stopped responding to me. They told me to run the diagnostic tool you can download from the bottom of this page:
Here is the result that I got:
Error detected at device 0 (PCI slot 09:00:00)Revision: 14.13Unit under test: NICModule: IRQ TestTest Name: IRQ CheckError #18Cannot gain access to flash, SwArbit: 3100Msg: Failed reading NVRAM at 0x0000----I sent this result to them, and got no reply. I'd appreciate any help that anyone here can provide.
Did you try using these drivers?
Broadcom BCM5784M LAN or better known as Broadcom Netlink Gigibit Ethernet (64-bit drivers)
I just tried installing those drivers, and I'm getting the same result. My guess is that this might not be a driver issue.
Reinstall the operating system recently?
Try system restore and go back to when this worked?
Restart the computer and Press F2 on startup. Look and make sure everthing looks correct in the bios.
Start, control panel, device manager, network, right click on the adapter and make sure it's enabled there. If so, then try deleting it, then restart your computer. Windows should install it and correct the issue if there was a problem. Make a system restore point first in case this doesn't work.
I have a Latitude 5420 and problems with Broadcom Netxtreme Gigabit from the beginning (code 10 - malfunction). I tried everything, but only changing in BIOS at Integrated NIC from enabled to "enabled w/pxe" worked.
Blessings on your home!!! After 2 days of trying to reinstall drivers, it was the Dell directory that had the correct driver. Thanks for sharing your solution :-)
Hi, "You are a saver man, my personal Jesus Christ!" I think the recent BIOS upgrade to A03 caused the illness but you've found the cure. Thanks!
Worked for me. Great track. Thanks.
Latitude E5520 on which I just setup Windows 7 x64 RTM.
Code 10 disappeared soon after reboot and NIC showed up in the network center.
Please create a new thread if any questions...
Forum Member Since 2010
thanks andygandyg it works!