P703W Printer - Can't configure wireless - what's going on?!

Networking, Internet, Wireless

Networking, Internet, Wireless
From Wi-Fi to wired Ethernet, mobile broadband to modems: it's all spoken here.

P703W Printer - Can't configure wireless - what's going on?!

This question is not answered

I've got a new Studio 17 connected to my wireless network no problem. I just unpacked my new P703W printer - which looks great and prints great - but I can't get it to connect to my wireless network to save my life. It's within about 15 feet of the router. All of the information I have for the wireless connection is correct...but it won't connect!

Any ideas?! :-(

Natalie

All Replies
  • Natalie,

     

    First, start out by fixing your wireless router using these settings.

     

    Recommended Wireless Router Settings

     

    Download the latest drivers

     

    XP Drivers

     

    Vista 32-bit Drivers

     

    All other drivers

     

    How Do I Connect a Dell™ Wireless Printer to a Wireless Network


    Choose your printer. Beneath your printer, select your operating system. You'll be redirected to another page. Then click on show all steps. It will walk you through the installation process.

     

     

    Rick

    #DellRockStar

    What is a Dell Service Tag and how do I locate it? 

     

     

    Original poster, If you have solved your problem, can you please mark the correct thread(s) with your solution. Thanks 

    Welcome to Dell Community!

  • Hi Rick,

    Well that'd be great, but I can't seem to get onto the page for my router. I have a linksys-G router and I've been to the linksys IP address to try to reset my settings, but I can't for the life of me get it to open. I use what I THINK the password is (all I know is admin admin) but it won't let me in. Is there any way to find out what my settings are? I wasn't the one who set up my network, but I know he didn't assign passwords to anything. It's very odd. :-(

    Not sure what to do without getting the info I need to/from the router...

    Natalie

  • Natalie,

     

    First, to get to the login page, try this.

     

    Start, run or hit the Windows Key and the R key at the same time. Type

    CMD

    Hit enter. Now type

    ipconfig /all     (space between the g and / )

    hit enter. Look for the default gateway. Enter this number in the address bar of your browser(Might look something like 192.168.1.1)

    Username=admin

    password= admin or leave it blank, unless you changed the password.

    If you installed Linksys EasyLink Advisor, then you can open this program up. after it loads, click on the support tab and then wait. It will give you the password(s) you need. Then go to Linksys website (left column, enter model number in search box)and update the firmware for the wireless router. Model number needeed.

     

    Broadcast SSID(You may want to change this to make it easier to connect)

    Use WPA-PSK(TKIP) Security. Most wireless devices work best with this type of security.

    Mixed b and g mode(n if available)

    Use channels 1, 6 or 11. Most devices work better on these channels.

    Save and exit. Power everything off for 30 seconds. Power everything back on, wait 30 seconds, now try to connect.

     

    Now setup the printer.

     

     

    How Do I Connect a Dell™ Wireless Printer to a Wireless Network

     

    Choose your printer. Beneath your printer, select your operating system. You'll be redirected to another page. Then click on show all steps. It will walk you through the installation process.

     

     

    Rick

    #DellRockStar

    What is a Dell Service Tag and how do I locate it? 

     

     

    Original poster, If you have solved your problem, can you please mark the correct thread(s) with your solution. Thanks 

    Welcome to Dell Community!