I am using Dell D600 with WINXP SP2. It detects the wireless network but it is unable to connect with it. I have tried all tools available on dell site but nothing worked.
Can anyone suggest a solution to this.
Are you running with any security on the wireless? If so disable it and see if it will connect?
Temporarily disable your firewall/av and see if it will connect that way
Boot the computer to "Safemode with network support" and see if it will connect there.
HomeBuilt SandyBridge P8P67 i7 2600k @ 4.5 ghz 8gigs GSkill Ripjaws. Corsair 800D Case and AX1200 Ps X-Fi Titanium Fatal1ty pro PCIe Sound CardDell Studio XPS 1645 Window 7 Pro
Forum member since 2003
I have tried all, NO FIREWALL, NO ROUTER SECURITY, NO ANTIVIRUS & SAFEMODE WITH NETWOK SUPPORT.
The problem is same, It detects a network but can't connect.
Starting to think that perhaps the card is bad.
Try running this WinSock XP FIX Just download it to you desktop and run it.
Also check in device manager to make sure that the adapter is showing correctly and with no errors next to is.
Tried the WinSock fix, but the problem is still there. Any other bright idea.
Remove and reinstall your wireless drivers. Make sure you router has the latest firmware.
After that would suggest a new wireless card.
If it can see the wireless network, it is almost always a configuration problem (though it is occasionally a hardware problem with the card).
Is MAC address filtering enabled on the router you are trying to connect to? If it is then you will need to add the MAC address of your wireless card to the list of allowed adapters.
You can request replacement reinstallation media for US purchased systems here.Dell Drivers & Downloads for all systems.
I have tried reinstalling windows and all drivers. Actually its an Intel Centrino Machine with 2100 Network Connection Wireless Card.
I have tried drivers from Dell & Intel itself, have tried many configurations but of no USE. Then have read an article that sometime its due to Accesspoint or router (compatibility issue), so now I am trying to find a USB wireless Lan or a router to prove the theory.
Anyway thank you all for the help and if you find any info on this problem please let me know. The wireless router I am using is Zyxel, and my own HP Pavilion is working fine with it.
I'm having a somewhat similar problem with my D600. It has a Dell TrueMobile 1400 Dualband WLAN card and was working fine until I got a virus. I had to reformat the hard drive and reinstall Windows XP and all the drivers. I now get very inconsistent performance. Sometimes it connects just fine and other times not at all. Right now it is sitting next to the wireless router and saying low signal level, status unknown. Now, a few minutes later, it's fine with good signal strength. I'm pretty confident I have the right drivers installed so I don't kow where else to look.
when you reloaded the drivers did you follow this sequence of reloading them
When you look in Device manager are any devices shown with either a ! or X next to them
I followed no order whatsoever so that might be the problem. I don't have any ! or X on any devic. It appears I wasn't running the Wireless Zero Configuration service so I ran that and set 'Use Windows to configure my wireless network settings" so we'll see how that goes.
I again re-installed windows XP, and followed the sequence told by Dell but the result is the same as before. Wireless LAN is finding the network but not connecting.
As I told you people before I am using Intel Centrino 1.4Ghz, with Intel 2100 Wireless LAN.
I tried a Wireless USB LAN, but the internal Wireless LAN is giving a conflict.
I think, I will have a re-think. Will change router ETC and then will check like someone said that it should be router firmaware issue and I am not in the mood of router firmware upgrade, better to barrow one from someone and try.
If I come to a solution I will let you people know.
Have you checked the route to see if MAC address filtering is enabled? If it is, then the computer would not be able to connect unless the MAC address for the wireless card is entered into the list of allowed connections.
BTW, Centrino is a marketting name for a collection of hardware products. It doesn't really tell us anything about your computer other than the fact that it has an Intel processor, chipset and wireless card.
Could you tell me please how to Boot the computer to "Safemode with network support" ?
(I too have a Dell D600 Latitude that recognizes my Network but will not connect to it wirelessly.)
I use a Belkin G router.
Thank you, Steve,.
boot the computer, At the Big Dell Splash screen tap the F8 key this will bring you a menu. select the option to boot into safe mode with network support
my DELL D600 lan network port is not working well, but i have drive the driver it work for the first time but is not working anymore, and the driver is not showing on the driver manager, and the wireless is working, please what is the problem????