GPS sensor Broadcom GNSS Geolocation

Mobile Devices

Mobile Devices
Mobile devices Hardware and Software discussion

GPS sensor Broadcom GNSS Geolocation

This question is not answered

Hi,

I have a problem with sensor GPS of Broadcom. My device is a Tablet Latitude 10 Dell

I use the software Sensor Diagnostic Tool that test operation of GPS, but i receive message The pipe is closed (exception HResult: 0x800700E8)

See the image. Someone Have this problem?

All Replies
  • 1)-Goto Device manager >view by connection > Enabled GPS driver

    2)-If possible, use Notepad to create 2 registry files LogOn and NetworkloOn as below:

    2-1) LogOn.reg

    [HKEY_LOCAL_MACHINE\SOFTWARE\Broadcom\Location\HAL]
    "LogEnabled"=dword:1

    2-2) NetworkIoOn.reg

    [HKEY_LOCAL_MACHINE\SOFTWARE\Broadcom\Location\HAL]
    "NetworkIoEnableMask"=dword:FFFFFFFF

    3)-Click to run the 2 registry above.

    4)-Find a clear location > Reboot your laptop > Run software Sensor Diagnostic Tool .

    5)-Don't worry about "The pipe is closed " > wait for 2-3 minutes > the yellow "Initializing" will turn green "Ready".

    6)-You may repeat step (4) with or without reboot.

    (*) Good luck!

    .

  • This procedure worked with you?
    These commands did not work, but thanks for helping.