Hi,I recently purchased a new Dell Inspiron 15R laptop (Inspiron 5521) online. It came with Windows 8 OS and Intel 3rd gen Core i5-3317U CPU and Intel HD Graphics. After just two months of usage its screen has gone blank. It shows nothing on the screen. I tried to troubleshoot with no success. It happened when the laptop was idle for sometime and the screen went off. After that I could not see anything on the screen (even Dell logo) when I tried to restart it.1. As suggested on other threads I tried to run Diagnostics (by pressing 'D' and Power button). There is nothing shown on the screen2. Tried to bring up the System setup by pressing F2 immediately after pressing Power button. Nothing shown on the screen. After sometime the Power LED went off.3. Tried to bring up the Diagnostics menu by pressing F12 immediately after pressing Power button. Again nothing shown on the screen.This model does not have a VGA port so I could not connect to a separate monitor. Please help me.Thanks
I must appreciate the ease with which you are handling this technical issue on your computer. Please try the below mentioned steps to identify the pproblem:
Please reply the results.
Thanks & Regards,Nikhil D#iworkfordellTo know more about Dell Product Support, Drivers & Downloads, Order & Dispatch status -> choose your region US Customers; India Customers. For Dell Support videos click Here.
Thanks Nikhil for the suggestions. Here are the results.
1. I removed all the external peripherals including battery and power cable. I pressed and held Power button for 20 seconds.
2. a) switched on the laptop with only the power cable connected (without battery).
b) removed the power cable and repeated step 1
c) switched on the laptop with only the battery (no power cable)
I did not see anything on the screen
3. I skipped the third step in your post because I did not see anything on the screen in step 2
4. Ran Diagnostics by pressing and holding Fn button and powering on the laptop. Again there is nothing visible on the screen. But I heard beep sounds. First the beeps (three beeps if I am correct) are 3-4 seconds apart, i.e, first beep - 3 sec gap - second beep - 3 sec gap - third beep. After that I heard three beeps continuously, then a gap of few seconds - again three beeps continuously - then gap and so on. It stopped beeping after a minute or so. The power indicator is stable in white color (no flashing). But when I heard the second set of beeps the light on Caps lock key was flashing in sync with the beeps.
I tried one more thing: inserted a bootable Ubuntu CD in DVD drive and restarted the laptop. I did not see anything again. Don't know if the first bootable device is set to DVD drive.
I don't know if this helps in diagnosing the issue. But I am really afraid that my laptop screen is dead. I don't see anything no matter what I do. The only thing that's giving some response is the Fn+Power button combination.
Ideally, 3 beeps indicate a possible motherboard failure. Please use the following link to check your computer Warranty status: http://tinyurl.com/5r4b8j
If the system warranty is active, please private message the system service tag, contact number and registered owner’s name.
To private message, click on my user name, click Add as friend and click start conversation. If the warranty of the computer is inactive, we would be able to provide limited support, which will not cover part replacement, software support and onsite technician.
Awaiting your response!
I hope it is not a motherboard failure. I ran nmap tool and found that the laptop is up and running, but has black screen. Here is the output of nmap. Is there anyway that I can connect to this laptop remotely (Remote Desktop Connection etc)?
Unfortunately I got this laptop from my friend in Canada and I stay in India. Can I transfer the warranty to Dell India?
Nmap scan report for 192.168.2.2
Host is up (0.0050s latency).
Not shown: 991 filtered ports
PORT STATE SERVICE VERSION
135/tcp open msrpc Microsoft Windows RPC
139/tcp open netbios-ssn
445/tcp open netbios-ssn
6646/tcp open unknown
49152/tcp open msrpc Microsoft Windows RPC
49153/tcp open msrpc Microsoft Windows RPC
49154/tcp open msrpc Microsoft Windows RPC
49155/tcp open msrpc Microsoft Windows RPC
49157/tcp open msrpc Microsoft Windows RPC
Service Info: OS: Windows
Host script results:
|_nbstat: NetBIOS name: xxx, NetBIOS user: <unknown>, NetBIOS MAC: xx:xx:xx:xx:xx:xx
|_smbv2-enabled: Server supports SMBv2 protocol
Yes, you can connect an external desktop monitor to the laptop so that we can isolate if this is an issue with the video card/mother board. You said the 'system is up and running during the nmap tool'. Does it mean the black screen issue is intermittent? Does this black screen come up while using any specific application or program? Or does it happen only during start up?
If the system has atleast 1 year Onsite warranty when it was purchased, it qualifies for International warranty.
To check the warranty status and to change the ownership of the computer, refer this link: http://dell.to/qNc5Am
Kindly reply for any further help!
I ran nmap tool remotely from my desktop PC, NOT on the laptop. The laptop screen never came up. I cannot connect the laptop to my external desktop monitor because there is no VGA port on the laptop. Please advise me if there is a way to connect it.
The laptop came with one year warranty (I guess it is Return to Depot warranty). Does it qualify for international warranty? If not, can I contact Dell Support here in India?
Yes there is a HDMI port on the left side of the laptop, please connect an external display using an HDMI cable and switch the display and check if there is any display on the external monitor. Please reply with results.
I suggest you to transfer the ownership using the link provided by me in the above post, with which you would be able to get limited support.
Please reply for further help.
I have been using my laptop since 7 months ago.My laptop's model is DELL inspiron 15R-5521 with windows 7(ultimate),8gb ram,1 TB HD drive.but now a days it shows a problem which bother me very much.When i switch the power key there is no display and a bad sound beep in the sound box like tap tap tap....I informed that problem to an engineer and he says that this problem is creating for my keybord fault.But it should be noted that there is no disturb in my keybord.I really dont understanding the actual problem of my laptop.
I need your help very badly.please help me.
I would suggest that you run the diagnostics on the computer by following the steps mentioned below and check if there is any issue with the hardware on your system.
1. Turn on or restart the computer.
2. Immediately at the Dell logo screen, starting tapping the <F12> key once a second until the One Time Boot menu appears (if the computer boots to Windows turn the computer off and try again).
3. At the One Time Boot menu, press the <Down> arrow key to highlight Diagnostics, PSA+ or Enter ePSA, then press <Enter> to begin the hardware Diagnostics.
4. Write down any error codes listed. Reply to us with the error codes.
#iwork4DellOrder Status : http://dell.to/1fgKSTrDownload Drivers : http://dell.to/1hcxG98
I restart the laptop and pressed the F12 key.Then i choose the diagnostic menu It gave me an Error code:2000-0334 AND Validation:103800.
Thanks for replying me.
The error indicates there may be an issue with LCD. However I would suggest you to update the BIOS and rerun the diagnostics again. Please enter your service tag # on the link below, select the OS, then download the BIOS from BIOS section onto the system and install it.
If the error gets repeated then please send me a private message with the computer's service tag, Name registered during the system purchase and email address so that I can check what can be done. To send a private message, click on my name and select start conversation.
Please let me know if this helps.
The laptop worked well till yesterday, I closed the lid and plugged it to charge overnight and today when I tried to start only blank screen appears with two beeps as (beep-beep some interval beep- beep ....) I reinserted my RAM and the same thing occurs. Before this screen blackout it showed me some error code 0xc0000185 and 0xc000021a(not A).