BIOS Boot sequence erased (UEFI or LEGACY)

Laptop

Laptop
Laptop computer Forums (Audio, General Hardware, Video)

BIOS Boot sequence erased (UEFI or LEGACY)

This question is not answered

Hi everybody

 

When i start my VOSTRO 3360 on Windows 8

It see the DELL logo (F2 / F12)

 

But i loop on a screen because there is no sequence for boot

No LEGACY sequence boot

No UEFI sequence boto

   

 

When i press F2 to the BIOS , same problem

HDD is set to AHCI

No sequence

 

All was working great since i bought it one month ago

But now i fear my work will be lost if someone does not help me to find the answer

 

Could it be material ? HDD problem ... explaining why there is no device detected so no sequence

Motherboard ? (not recognize the HDD)

 

Plase help me

Why i try to LOAD F9 settings in BIOS, i can t save it

Formset 98FBBCFB-1392-4FDE-ABB8-C41CC5AD7D6D

Failed to save storage: Boot_mem-Boot_ITEMS. Status Access Denied

 

 

All Replies
  • I have the same problem on my Inspiron 17R.. Did you resolve your problem?

  • Change the option Legacy to UEFI and show two options

    Add boot option and delete boot option.

    Add HD boot and CD boot.

    These models with windows 8 are configured to boot on network when UEFI is selected. just add optin to HD and CD and solve this problem

    Dell Vostro 3550 - i5 - 2410M - AMD Radeon HD 7650M - 8GB DD3 RAM - 500GB 7200 RPM - Windows 7 Ultimate 64 Bit

    I can fly with this model.

  • I have the same problem with an inspiron 13z that does not boot.

    If I have a USB drive inserted then entering to 'add boot option' pops up a window (otherwise without USB drive i get a warning: no file system). In the window one needs to specify the 'boot option name' and 'file name'. There is also a 'file system list' which says

    pciroot/PCI/USB/HD with some hexa addresses after each. This list cannot be edited or modified. So what should I enter for the file name?

  • Nothing worked except replacing the motherboard in my Inspiron 13z. Now, it is booting and working fine so far.

  • SAME PROBLEM.. PLEASE HELP!!