I have a Dell Inspiron 1545, Pentium Dual-Core processor, 4GB RAM, windows 7. I am thinking about upgrading my CPU to a newer version, for example the intel i5. I was wondering if this was compatible with the 1545, and if not what is the highest processor upgrade i can do?
No, you cannot -- the Core 2 uses a different socket and support chipset from the newer Core i3/5/7 CPU. You can use any of the Core 2 Duo mobile C***, but NOT the newer Core i3, i5 or i7.
Cheers mate, thats all i needed to know.
I saw that a certain cor i5 procesor--Intel® Core™ i5-520M Processor, was compatable with the 1545, it is a dual core model, and released in early 2010, and on a site it listed this as one of the many compatable cpu's. I was just ondering if this was corect or incorect. thanks.
It is completely incorrect. You cannot use any Core i in place of any Core 2.
I found out the hard way that the Dell bios does not recognize the T7500, so it all depends on the bios. **The revision of the processor in the system is not supported.
You would need to check whether it is compatible with your motherboard but off hand I don;t know. if you contact the sales team they would be able to hjelp .
I've been looking through the Intel website so I don't know how far up the intel core 2 duo I can upgrade to. So I know I have a Celeron 900 with 800Mhz FSB 2.2Ghz. Another forum tried the T6400 but I was thinking of the X9000 2.8GHz or the T9500. They're both 800MHz FSB and PGA478 socket, there were lower clock speeds but I don't know whether I can upgrade up to the X9000 or even a higher FSB say a 1066MHz hence why I thought staying in the 800MHz range of CPUs might be best.
not sure whether this link works
You can forget the X processors - they draw far too much power for the 1545. The fastest CPU shipped (the P8700) is a 25W CPU. The X9000 draws 44 W -- there's no way the 1545 can handle that.
ah yer, they're xtreme cpus, removed those.
thanks. I didn't know the motherboard will run at 1066MHz. Couldn't find any motherboard specs to look at so I can see what the maximum of anything, I can put in.
Fitted a 2.53Ghz 1066MHz FSB and it works but crashes when watching dvds or playing battlestar galactica online. So I've ordered a 2.4Ghz 800Mhz FSB intel core 2 duo. I decided to keep to the same FSB as the original Celeron CPU that was in it. We'll see how that goes. I shouldn't think I'll have problems, a bit of a shame I have to loose .13 Ghz and 200MHz FSB but it's better than having a Celeron 900MHz CPU in it.....lol.