The hard drive in this Inspiron E1505 recently went kaput, and I've installed a new drive into it. The drive is recognized in BIOS with no problem, however when I boot from the Windows Vista setup disk and attempt to do an install, it says that no drives are found and suggests I click "Load Driver" to provide a driver for installation. I've tried doing this, using the Intel Mobile Chipset drivers that I've downloaded and extracted onto a USB drive, but that doesn't fix the problem.
I've tried all of the drivers in that are listed when "Hide drivers that are not compatible with hardware on this computer" is selected... dmi_pci.inf, ich7core.ing, ich7usb.inf, ich7ide.inf, 945GM.inf, and ich7id2.inf. The result is the same for each one. It goes back to the 'Where do you want to install Windows?' screen and tells me that no drives were found.
I've tried updating to the latest system BIOS as well to no avail.
Thanks for any help.
So far as I know, the E1505 does not have a SATA mode. It is permanently in IDE compatible. Was this machine delivered with Vista? If you have a Dell Windows XP installation CD you might try that as a quick check to make sure the computer is communicating with the hard drive. If you don't have that, it's time to use diagnostics to see if the drive is working properly. The easiest way to do that is boot the Dell Resource CD if you have it. If not, the downloads page has a file that can be used to build a diagnostics CD.
Dell Forum member since 2005
Windows Vista should sort it automatically, but it might be worth checking in the BIOS to see what mode the hard drive is set to - i.e. SATA or AHCI?
Whichever one it's set to, try the other?
From experience, I've found that: “Beauty is in the eye of the beer-holder”!!
XPS M1730: Smoke Grey Magnesium Alloy Chassis - with White LED Backlights17" UltraSharp WUXGA Widescreen TFT (1920 x 1200) with TrueLifeIntel Core 2 Duo Processor T9300 @ 2.50GHz (800 MHz FSB, 4MB L2 cache)4GB (2x 2GB) Patriot Signature PC2-5400 @ 667MHzDUAL 512MB Nvidia 8800M GTX cards in SLi + 128MB Ageia PhysX 640GB SATA II (2x 320GB WD Scorpio Black 7200rpm)8x Super-Multi DVD±RWCreative X-Fi Notebook (ExpressCard) + Creative GigaWorks T40 Series IIIntegrated 2MP WebcamDell Wireless 355 Bluetooth 2.0 ModuleIntel Next-Gen Wireless-N Mini-CardTV Tuner and Dell Travel Remote Control 4-in-1 Flash Card Reader (SSD/MMC/MS Pro/xD)
230W AC Adapter / 9-cell Lithium-Ion BatteryWindows 7 Home Premium (64bit)
Thanks for the reply. Unfortunately, I cannot find this particular setting anywhere in the BIOS. I know I've had to change this on other computers in the past (on my Latitude E6500 it's under System Configuration-> SATA Operation), but darned if I can the equivalent setting on the Inspiron E1505 it on this one. Could it possibly be a "hidden" option somewhere?
Here are the items I see in the BIOS on the E1505:
Media Card and 1394
LCD Panel Expansion
Internal HDD PW
Wireless Hotkey Change
CPU XD Support
Multi Core Support
HDD Acoustic Mode
Auto On Mode
Auto On Time
USB Wake Support
Serial ATA DIPM
Fn Key Emulation
Hi, In my system it is under 'Integrated Peripherals', then at the bottom of the list, it says, 'Sata Mode', then next to that it will say what mode your drive's are set at. In my case my drive's are set at 'IDE'. To change it, scroll down to it, high light it, then press enter.
If my answer Was helpful? Please let me know by clicking on the 'Did this answer your question' and clicking on the Yes button. Thanks.
If there was an Integrated Peripherals option, I would try that!
Anyone have any advice on this one? Being unable to install an operating system has really limited the usefulness of this computer...
How the heck can I change the SATA mode if I'm not given the option in the BIOS?
Try removing the hard drive and reseating it.
Dell Chromebook 11, Alienware M11xR2
Forum Member since 2004
"If your issue was resolved, please click Yes ".
Excellent suggestion about trying to boot from a Windows XP installation disc. I tried this, and the Windows XP setup did see the hard drive with an NTFS partition already on it. I deleted the partition, rebooted with the Vista installation disc, and finally Vista could see the drive!
I guess that somehow there was a corrupt partition on the drive which was causing it to be invisible to Vista. And for some reason, only Windows XP could see it and remove it. Go figure.
Glad to be up and running again! Thanks!
Happy I could help. Best of luck to you!