How Can I CTRL + F11 my computer back to factory settings?

Laptop

Laptop
Laptop computer Hardware and Software discussion

How Can I CTRL + F11 my computer back to factory settings?

  • I tried this technique, since I don't have a startup CD.  But it took me to a page that said Windows was started improperly, and that I could enter Safe Mode, or restore to most recent settings that worked.  There was no option that I saw to restore to factory settings.
     
    My computer is just much slower than I think it needs to be so I want to compltely format my C drive.  I moved all of the important stuff to an external hard drive, but now I can't seem to format.  I want the system to be completely empty except for Windows XP, since I don't have the boot up copy.
     
    I purchased the computer in July 2005, so the factory settings restore should work, no?
     
    Inspiron 600M
    1.80 GHZ
    512 MB of RAM
     
    If you need any more information please let me know, but I really want to fix this and everything I read doesnt seem to work.
  • No, that's the wrong screen. That sounds like XP's F8 advanced boot screen.

    Here are the troubleshooting steps for Dell's PC Restore system:

    (1) Are you sure you have a DSR (PC Restore) partition? When you boot into XP, take a look in Disk Management (Start>Run>"diskmgmt.msc") and look at the schematic "map" of Disk 0. If you see an "unknown" partition of about 3-5 GB at the end of the disk with no drive letter, that suggests your DSR partition is still there.

    (2) Do you have a Dell MBR? This is easily overwritten, so even if your system shipped with the Dell MBR, it might not necessarily still have it. The telltale sign of the Dell MBR is a black screen with a single blue line at the top, with "www.dell.com" in white-on-blue letters. This screen should appear for 2 seconds between the POST phase (Power-On Self Test, with the giant blue Dell logo) and the XP splash screen (when XP starts to boot).

    (3) If the answer is yes to both, then make sure you're pressing Ctrl+F11 at the right time. When the POST phase starts, you'll see the blue Dell logo, there will be a brief delay, then the "F2" and "F12" prompts will appear in the corner of the screen. After POST completes, you'll see the 2-second pause with the blue-line, followed by the XP splash screen.

    You must press Ctrl+F11 after the F2/F12 prompts appear, and before the end of the 2-second blue-line pause. Hold down the Ctrl key, press down the F11 key, then release both keys together. (Note: contrary to urban legend, it's okay to press the keys more than once.)


    Dan Goodell
    Inside the Dell PC Restore Partition