i have Dell Latitude E6420 with Windows 7 OS installed.
The driver for Biometric device is also installed. But windows is not finding any biometric device as shown in the following picture message.
Using Internet Explorer, go to Drivers & Downloads enter your service tag number. Look under security. There you'll find your fingerprint software. You might have to use the XP or Vista drivers and install in the Compatibility mode
What is a Dell Service Tag and how do I locate it?
Original poster, If you have solved your problem, can you please mark the correct thread(s) with your solution. Thanks
Welcome to Dell Community!
Microsoft MVP - Windows Expert-Consumer April 1, 2012 to March 31, 2015
I could install the driver for the hardware but still not working. I got the following message as shown in the figure below
Do you have Dell Control Point installed? That may be under applications.
Did you try right clicking on the biometric device, then left click check for updates?
If you are using the WBF solution, then please follow these instructions:
Description (Brief External Description)
This is the Dell ControlVault Windows Biometric Framework (WBF) Driver supporting Integrated Built-in Fingerprint Reader devices in systems with Windows 7 Operating Systems.
IMPORTANT: The stand-alone Dell ControlVault Windows Biometric Framework Driver cannot coexist with other Biometric Authentication Software Applications or Drivers. Therefore it is important to uninstall any Biometric Authentication Software if previously installed.
(Start->Control Panel->Programs and Features)
Check and un-install the following components if present:
• Dell ControlPoint Security Manager
• Dell Data Protection | Access | Drivers
• Dell Data Protection | Access | Middleware
• Dell Data Protection | Access
• Any non-Dell Windows Biometric Framework Drivers or Applications
Dell ControlVault WBF components installation steps:
NOTE: Installation order is very important – use the following procedure, including reboots or the software will not function properly:
1. Download the following software packages and install in the order listed below:
a. Dell Data Protection | Access | Drivers Package
i. Double click package filename and select Custom installation Setup Type
ii. Uncheck the Dell ControlVault box
iii. Continue to follow the wizard installation instructions until completed
b. Dell ControlVault Windows Biometric Framework Driver package
i. Double click package filename and follow the wizard installation instructions
ii. Go to the C:\dell\drivers\RXXXXXX\USH folder and double click on CVHCI.msi and follow the wizard installation instructions until completed
c. Dell ControlVault Firmware
ii. Go to C:\dell\drivers\RXXXXXX\firmware folder and double click on ushupgrade.exe and follow the wizard installation instructions
iii. In the pop up dialog window press the Start button
iv. When installation is completed press the Restart button. The system will reboot.
2. Enable ControlVault Windows Biometric Framework feature (Start->All Programs->Broadcom->USH Tools and click on ControlVault WBF
a. In pop up dialog window select Enable and the press the Set button.
b. Press the Exit button
c. Allow time for any windows updates to complete
Windows Update may sometimes conflict with the installation of the Dell ControlVault Windows Biometric Framework driver installation and not allow proper installation. To identify if this occurs, go to Device Manager (Start->My Computer->Properties->Device Manager) and click on “Biometric Devices” and notice if there is a yellow exclamation mark (yellow bang) on the “ControlVault w/Fingerprint swipe sensor”. If this is so, right click on “ControlVault w/Fingerprint swipe sensor” and select Update Driver and choose “Browse my computer for driver software. Wait until Driver has been detected and installed (~30 secs).
Steps to run Fingerprint Management Application (FMA) User Interface:
1. Go to Windows Start->Control Panel->Hardware and Sound->Biometric Devices
2. Click on Change biometric settings
a. Select Biometrics on settings
b. Choose Allow users to log on to Windows and domain
c. Press Save Changes button
3. Click on Use your fingerprint with Windows
4. Follow wizard installation instructions to enroll your fingerprints(s)
5. Begin using fingerprint authentication feature by selecting the Fingerprint emblem at Logon. The first time it will ask you to enter your password to verify authentication. Thereafter you can use just the fingerprint to logon. A slow finger swipe is recommended. It may take a few seconds to fingerprint authenticate.
Can I use the FP to log into website?
Yes, try trail sample of TrueSuite Application. This App allows you to select fingers to open user selected websites:
Thank you very much.
I just installed windows 8. I will try to install the FP again.
Thanks Rocketman2011! I've bought a Dell Precision M6700 a month ago, but couldn't get the fingerprint logon to work (using the default installed Control Vault software).Searched all over the net until I find this thread.I swapped the drivers for the M6700 compatble drivers and follwed all the steps to the letter.After a dozen restarts it finally works!One swipe and Windows boots!Great job!