My wife's E1705 has no sound. I checked the sound settings in Control Panel and everything is grayed out. I also saw that she had a Sigma audio icon in Control Panel but when I click on it I get a message that it is not installed. I then downloaded and installed the driver from Dell's site but during installation I get a message that says "please wait while your audio hardware is updated, once that goes away the driver starts to install for a second but then the installation screen just disappears.I also checked under Device manager and there are no question marks or exclamation marks, I checked the audio hardware but it just says unknown hardware with no drivers. Can anyone tell me what could be the problem and what I can do to fix it?
Try running the audio tests in Dell Diagnostics. These interactive audio tests are designed to narrow down the problem to either the software or hardware. The tests are independent of Windows and drivers, meaning it doesn't matter if those are working correctly or not. To run Dell Diagnostics1. Restart the computer and tap the f12 key as soon as it starts to boot up . 2. Select 'Diagnostic' from the boot menu. The computer will run its pre-boot assessment tests (PSA) before Dell Diagnostics starts. During the PSA you will hear some tones through the system speaker but this does not adequately test the audio hardware. Dell Diagnostics plays an instrumental piece of music complete with drums, so if you only hear some tones then you have only run the PSA.3. Dell Diagnostics should open after the PSA tests, or you should see an option to open it. If you have ever reformatted your entire hard drive then Dell Diagnostics will no longer be there as an option. In that case run it from the Drivers and Utilities (Resource) CD if you have one.4. Select 'Custom', then the audio tests. (At this point - after you have opened Dell Diagnostic custom - if you can't find the option to select the audio tests that is a symptom of a failed audio chip.)5. The tests will run. Alternate between using headphones and listening to speakers in case only one signal path is working.The tests will play some audio and ask you whether you heard it. 6. If you don't hear the music during the test it definitely means there is a hardware failure somewhere in the system. In this case Dell will repair the computer if it is still under warranty.7.If you do hear the audio during the test but not when you boot back into Windows, that almost always means the hardware is okay but there is a problem with the audio driver or with Windows.8. Error codes: If you answer 'no' to any question that the test asks you, the test generates an error code that can tell a Dell technician that you answered 'no' to that question. The test does not know the exact component that has gone bad. Before answering 'no' to a question, make note of the circumstances at that point so you will know in general what the error code means.
Jim Coates -- senior forum member