I have installed a new Nvidia GeForce GTX 1050 Ti graphics card in my Precision T3500 into the first PCIe x16 slot and was not able to install the drivers: the screen would go blank and the computer would just freeze in the middle of installation.
That same graphics card works just fine in the second PCIe x16 slot with all the latest drivers installed and even with some overclocking of GPU memory.
When I moved the graphics card to the first PCIe x16 slot after the successfull installation of the driver, the computer would not boot and would just start beeping. When I moved the graphics card back to the second PCIe x16 slot it worked just fine.
Why would the graphics card work fine on the second PCIe x16 slot, but not on the first PCIe x16 slot?What is the difference between these two PCIe x16 slots in Precision T3500?
P.S. To illustrate this: when I say first PCIe x16 slot I mean the blue one, and the second PCIe x16 slot is the black one.
Both slots should work the same so it sounds like one of them is faulty. Do all the pins on the connector look perfectly aligned?
Dell | Social Outreach Services
I'm based in the UK and I'm usually available Monday to Friday 10am-5pm GMT
Get Support on Twitter @DellCaresPro
Thank you for your response.
I had AMD Radeon R7 200 graphics card in the blue PCIe x16 slot working fine just before I upgraded to Nvidia GeForce GTX 1050Ti.
When I upgraded to Windows 10 over a year ago I had trouble with Windows 10 auto-updating the driver resulting in a blank screen and frozen computer in the middle of installation, but the AMD card was working fine with one of the older drivers and I never tried the AMD card in the second (black) PCIe x16 slot.
It is possible that Nvidia GeForce GTX 1050 Ti will work fine in the blue slot with an older driver too, but I prefer the latest driver.
I know that some manufacturers make the blue PCIe x16 slot different than the other PCIe x16 slot and I found out that the motherboard is Dell P/N 9KPNV, but I could not find a manual for this motherboard to check the differences.
I will check the pins in the blue slot when I have a chance.
P.S. Now I recall that I had problems updating to the latest driver on Windows 7 x64 when I had factory installed Nvidia Quadro FX card in the blue slot, and this makes me think that something is different with that blue slot.
After further investigation it looks like the blue slot is the "primary" PCIe slot and the black is "secondary"
I'll have a look into why it only works in one and not the other
I appreciate you help.
I thought that certain settings for "primary" blue PCIe X16 slot might be hardcoded in BIOS to use that slot with supported by Dell graphics cards, and that could make this slot incompatible with the card I am trying to use.
That's why I was looking for the manual guide of Dell P/N 9KPNV motherboard, but could not find it.
I saw a youtube video where they used Nvidia GeForce GTX 1060 in the blue slot on T3500 though.
I need the manual for the Dell 9KPNV motherboard also to find out if I can upgrade the Intel Xeon W3530 to X5570 or something better on my Precision T3500.
It does seem to be a fault with the slot, can you check a different card in it to see if it posts or not? The most information I can get you on the motherboard is contained within the service manual:
(the X5570 is supported)
Thank you for checking.
I will inspect the pins and try Nvidia GeForce GTX 1060 SC Gaming in the blue slot.
Yes, I found the technical guide for Precision T3500 and see that X5570 is supported, but at this link they list X5690 as supported too, and it seems to be much better CPU than X5570:
Yes, the X5690 is listed as compatible too (it must have been added after publication of the spec sheet)
The T3400 and T3500 supports AMD CROSSFIRE but it DOES NOT SUPPORT Nvidia SLI. You cant have AMD Card and NVIDIA Card in the slots at the same time. This is not supported. Some Newer cards REQUIRE UEFI system bios and so this may also be an issue.
Report Unresolved Customer Service Issues here I do not work for Dell. I too am a user. The forum is primarily user to user, with Dell employees moderatingContact USA Technical Support
By the way, is the compatibility list you are looking at available to general public? If yes, what is the URL?
Thank you for information.
I am not trying to use two graphics cards at this point though, so your answer is somewhat irrelevant.
The compatability is based on my T3500. Non UEFI cards like the 750TI or 950 or 960 or 980 work fine but only 1 card.
I have a T3400 and a T3500
I have 2 Radeon 5770 cards and I have 2 GTX 960 cards.
Only the Dual 5770's work.
Most newer R series cards do not support DOS VESA Mode 103 so you can never ever get F2 into bios again if you have one of these UEFI cards.
My question about compatibility list was addressed to DELL-Alasdair R, as he mentioned that "the X5690 is listed as compatible too (it must have been added after publication of the spec sheet)". This was about CPUs, not graphics cards. So, I wanted to find out what list he is looking at and if I can see that same list.
Again, I am not trying to run two graphics cards, and what you have on your T3500 is not really the point here.
I have Nvidia GeForce GTX 1050 Ti that works fine in the black PCIe x16 slot, but not in the blue PCIe x16 slot and I want to know why. If it is a UEFI graphics card that I cannot use with Precision T3500, then how come it works in the black PCIe x16 slot?
Besides, I see youtube videos about Nvidia GTX 10 series graphics card working fine with T3500.
There is no "list" with X5690 or any other processor as an upgrade. Dell only supports what came with the unit. There are various Versions and Revisions of the T3500 motherboard and Copper and Aluminum heatsinks. They are not interchangeable.
Later revisions of the spec say
Chipset Intel X58
Processors Intel® Xeon® 5600 series processors up to six-cores with up to 6.4GT/s (Intel QuickPath Interconnect) and up to 12MB shared cache.
DELL DPN: XPDFK Precision Workstation T3500 Motherboard
Intel Xeon 6-Core (X5670, X5650)
Intel Xeon Quad Core (W3550, W3565, W3530, E5640, E5630, E5507),
Intel Xeon Dual Core (W3505, W3503),
Intel Xeon (W3680)
The Original spec sheet says
The Late 2010 Spec sheet says.
There are at least 3 versions of the board and within familys there are more than one Revision.
heatsink P/N U016F (w/ heatpipes) needed to support higher TDP
People also use a fan tied with Tie Wraps on the heatsink to get better cooling.
K095GXPDFK9KPNVA17 bios is herehttps://downloads.dell.com/FOLDER01514371M/1/T3500A17.exe
Ok, Speedstep, thank you for details.
I mentioned earlier that my T3500 has Dell 9KPNV motherboard.
I guess DELL-Alasdair R was looking at that second spec sheet when he said that X5690 CPU should work, as it belongs to X5600 series.
And in regards to the main graphics card question: I will inspect the pins and try Nvidia GeForce GTX 1060 SC Gaming in the blue slot, unless you can tell me why GTX 1050 Ti works fine in the black PCIe x16 slot and does not work in the blue slot.