I have a Dell Inspiron 570 for about two years that was completely stock. All it was used for is internet and occasionally Solid-works and Auto-Cad,
but mostly file storage. The case was damaged during a move and although it still ran perfectly with no problems whatsoever, the front was cracked
and the side was scraped and dented. So I bought a new case (Antec Sonata Proto). I removed the guts and started changing everything out and
that's when I ran into a small problem. The main switch wiring is different and it has a reset switch and a buzzer that I have no idea what to do with
and the connectors for the Power and front LED lights are separate unlike the stock switch/light assembly. I looked everywhere and I cant find a Pin
Assignment for the motherboard (4GJJT) and I don't want to go by trial and error.
The new connectors I have are like this coming from the front of the new case:
All the wires are on different connectors and I need to hook them up to what is on the Motherboard, which looks like this
The connector on the mother board looks like the square above and the numbers are corresponding with the wires on the stock
connector from the original Dell Inspiron 570 switch/LED setup.
If anyone knows the Pin Assignments or can tell me which connectors to put where that would be a big help.
Thanks in advance and I appreciate any help.
This kind of information isn't ever forthcoming. Dell Does not support doing this nor does it release this information.
http://www.stuartconnections.com has the cables.
Report Unresolved Customer Service Issues here: Dell - Unresolved Customer Service IssuesI do not work for Dell. I too am a user. The forum is primarily user to user, with Dell employees moderating.
Unfortunately I cannot post a picture using iPhone so here is the link to the similar post http://en.community.dell.com/support-forums/desktop/f/3514/p/19501816/20344555.aspx#20344555 And here link to my picture which I made based on actual wiring match http://en.community.dell.com/cfs-file.ashx/__key/communityserver-discussions-components-files/3514/6165.MOBO-front-panel-connector.JPG This is link to Inspiron 570 switch wire http://en.community.dell.com/cfs-file.ashx/__key/communityserver-discussions-components-files/3514/0878.Insppiron-570-power-connector-original-picture.JPG The above shown picture is not for Inspiron 570, sorry rdunnill, I seen it before on Tomshardware, I think it for Inspiron 580 - it differs from mine and I did wire to wire match.
Came back to make it nice
Inspiron 570 remastered in Cooler Master HAF 912 case
6 intake and exhaust 120 mm FANS <> Phenom II x4 965 BE OC to 4.0GHz <> Cooler Master Hyper 612 <> MSI 660 2GB OC <> 180 GB Intel 520 SSD, 1TB Seagate Barracuda 64 MB Cache HDD for Games as extension of SSD, 500 GB WD Caviar Blue HDD as data and 160 GB WD as backup (through PCI SATA card) <> 8 GB Corsair DDR3 1333 <>Hitachi GH70N DVD <> Corsair GS 600 PSU <> Battlefield 3 60 FPS on ULTRA
It's the standard Intel front panel layout, and Dell mATX offerings tend to use OEM variants of standard offerings (like the Foxconn G33).
"variants" - this is exactly the problem, my picture differs from yours rdunnill by little, but this little can drive people nuts, plus if you take a close look at my original on/off switch wires you can see 1 wire running loop, I did not see this on other models, another "variant"?
The XPS 7100 had this loop, too. It seems to be on the RESET pins.
Another 3 days of iPhone brrr. So far it seems that this loop presents at AMD based Dells? I did not see this on almost all Inspirons I checked.
Do you know rdunnill, which Dell models were made with AMD processors?
There were a few, although Dell is predominantly Intel.
Speedstep is a wealth of knowledge -- maybe he knows the list?
Thanks Kisianik, I'm a bit unclear on what pins 7 and 8 are for though - can't quite make out what that says and it doesn't seem to say reset. (Nofacing..?) Also will 5 and 9 wiring be necessary? 5 and 6 are the power switch right?
kisianikAnother 3 days of iPhone brrr. So far it seems that this loop presents at AMD based Dells?
This loop is present on the XPS 8300 and I presume the XPS 8500. However, it need not be present for normal boot in the case of the latter.