I have a Optiplex GX240 and a friend pulled his drive out of his Dimensions 4550 and was going to junk it for something else. So I took the chassis and it looks to be a match for my Optiplex GX240. So my question is could I pull my hard drive out and put it in the Dimensions without and issue's. If this isnt possible then I would like advise on speeding up my Optiplex Gx240. I add an extra drive for memory but it just seem to take lots of time to D/L anything. I mostly use it for social stuff and movies and games. So all advise welcome Thanks Warsteiner
If it's a PATA drive, it should work, but you'll likely need to perform a Windows install, repair or otherwise.
GX240 is SDRAM Motherboard. 4550 is something else. Stop 7b boot device not found.
You cant swap mix and match. This is not supported. You could reinstall from scratch but thats not the same thing.
Report Unresolved Customer Service Issues here I do not work for Dell. I too am a user. The forum is primarily user to user, with Dell employees moderating.
Get Support on Twitter @DellCaresPro
In a worst case, a repair install will work. Sometimes, just sometimes, an install from a different motherboard will work on its own.