I have vexing problem. I have put a Highpoint Rocket 640L PCI-Express RAID SATA card in my vostro 260 and I am not getting the boot up prompt to enter the cards BIOS and set up RAID.
Card is here
What happens is that the card appears to be defaulting to a JBOD setup, so the pc sees 2 hard drives and I can install windows on one.
Then I install the GUI confiig but can't create a RAID 1 as there is already an OS on 1 disk.
I need to set up the RAID1 in the bios before boot but am not getting this option.
I have a horrible fear this is a limitation of the Vostro 260 BIOS (it is up to day at A06).
Any suggestions welcome.
Well here are 2 possible work arounds for this problem.
1. CONFIRMED SUCCESSFUL
The card defaults to JBOD. if you install it and attach drives they appear to the PC BIOS and are usable.
It comes with software to configure RAID volumes from the OS itself. So you can use the software to configure RAIDs on HDDs attached to the card. It will not let you mess with the drive hosting the OS though. So do this:
2 - NOT TESTED but I think will work
The 640L cards write the raid config info to the drives themselves. So you should be able to put the card and drives into another computer, set up the RAID volumes in the 640L BIOS then move them back to the vostro before installing an OS.
The Rocket 64xL is only compatible in PCIe x4, x8, and x16 slots. Your Vostro 260 has one PCIe x16 slot reserved for the video card and three PCIe x1 slots. So the card cannot work in those x1 slots. See their User Manual page 3.
(Liaison for Desktops, Alienware, Monitors)#iwork4DellWould you like to be a Dell Community Rockstar?DriversOrder Status
That's why I put the card in the PCIe X16 slot. Am I missing something?
As I said, the card is working, I just can't get into it's bios to setup a raid to put the OS on.
I see. So you removed our video card from the PCIe x16 slot and then inserted the raid card. I think you should contact their support and ask if they have seen this issue of not getting to the card bios screen.
The system does not ship with a video card so the slot was empty. I will be contacting their support but as far as I can see 1 of 2 things is happening:
1. The vostro bios is not displaying the prompt on boot; or
2. The prompt is shown but is hidden by the Dell logo
In short, I don't think this is their problem, I think it is a Dell problem.
I can't think of any valid reason to not allow users to view the post outputs and most manufacturers (in my experience) provide the ability to switch off the logo in BIOS so that you can see them.
Is there a way with a jumper or something to turn off the logo?
While you're at it, can you point me to a mainboard manual? I can't find one anywhere.
This thread has been locked due to inactivity.For assistance,with same issue or a different issue,please click New Post on the top right to start a New Thread.
Dell | Social Media Outreach | Global Social Media & Community