Dell inspiron 620 and Ivy Bridge CPU's

Desktop

Desktop
Desktop computer Forums (Audio, General Hardware, Video)

Dell inspiron 620 and Ivy Bridge CPU's

This question has suggested answer(s)

Dear all, can someone tell me if my Dell inspiron 620 will support the new Ivy Bridge CPU's?. I know the chipset (Intel H61 Express) will suport the new CPUs but I guess dell will have to provide a bios update as these new CPUs use less power?.

Thanks,

Charlie

All Replies
  • Only if they update the Bios for the new Microcode.

    Name B65 H61 Q67 H67 P67 Z68
    Maximum DDR3 slots 4 2 4 4 4 4
    Overclocking GPU GPU GPU GPU CPU + RAM CPU + GPU + RAM
    Allows using Built in GPU Yes Yes Yes Yes No Yes
    RAID No No Yes Yes Yes Yes
    Maximum USB 2.0 ports 12 10 14 14 14 14
    Maximum SATA 2.0/3.0 ports 4 / 1 4 / 0 4 / 2 4 / 2 4 / 2 4 / 2
    Main PCIe Configuration 1 × PCIe 2.0 ×16 1 × PCIe 2.0 ×16 1 x PCIe 2.0 x16 1 × PCIe 2.0 ×16 1 × PCIe 2.0 ×16
    or 2 × PCIe 2.0 ×8
    1 × PCIe 2.0 ×16
    or 2 × PCIe 2.0 ×8
    Secondary PCIe 8 × PCIe 2.0 6 × PCIe 2.0 8 x PCIe 2.0 8 × PCIe 2.0 8 × PCIe 2.0 8 × PCIe 2.0
    Intel Rapid Storage No No Yes Yes Yes Yes
    Intel Active Management No No Yes No No No
    Intel Trusted Execution No No Yes No No No
    Smart Response No No No No No Yes
    Ivy Bridge Processor Support No Yes No Yes Yes Yes
    Release Date February 2011 February 2011 May 2011 January 2011 January 2011 May 2011
    Max TDP 6.1 W
    Lithography 65 nm



    Report Unresolved Customer Service Issues here:

    Dell - Unresolved Customer Service Issues

    I do not work for Dell. I too am a user.

    The forum is primarily user to user, with Dell employees moderating.

  • Hi, thanks for the reply. Do Dell generally update the BIOS in these situations or not please?

  • Depends.  In the case of the 620 I would say its likely because its still current.  Once the system becomes

    End of life the likely outcome is No more bios updates.  Current bios is A04.

    Dell Dell Device
    Release Date: 12/8/2011
    Version: A04
    Importance: Optional
    Download Type: BIOS
    File Format: Windows/DOS
    File Size: 4MB
     12/9/2011 12:12 AM      4296601 
    ms-a04.exe

    Requires the INTEL MANAGEMENT ENGINE to be installed.

    If you run the Bios update and it says ME not found you know what the issue is.

    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000001A:
    SANDYBRIDGE Q0 M12206A7_0000001A:              
    =================================================
    BIOS Version:                A04
    Release Date:                2011/11/21
    VBIOS:                       2102
    PSA Version:                 PSA4214 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-A04.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0xD25E
    Dword checksum: 0x2BF5D25E
    CRC-32:         0x7FFAE1CA
    
    Input filename: MS-A04.exe
    Word checksum:  0x5813
    Dword checksum: 0x1FFE5813
    CRC-32:         0xF512D8A3
    
    Input filename: BIOS-A04.ROM (system BIOS only)
    Word checksum:  0x4CEA
    Dword checksum: 0x182F4CEA
    CRC-32:         0x4DFC01F4
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. X23 turn to A04. 
    
    Notes
    ------------------
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000001A:
    SANDYBRIDGE Q0 M12206A7_0000001A:              
    =================================================
    BIOS Version:                X23
    Release Date:                2011/11/18
    VBIOS:                       2102
    PSA Version:                 PSA4214 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X23.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x7DAF
    Dword checksum: 0x2BF77DAF
    CRC-32:         0x97E9BC39
    
    Input filename: MS-X23.exe
    Word checksum:  0xEEFD
    Dword checksum: 0x2000EEFD
    CRC-32:         0x9A10D243
    
    Input filename: BIOS-X23.ROM (system BIOS only)
    Word checksum:  0xF83B
    Dword checksum: 0x1830F83B
    CRC-32:         0xA5EF5C07
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. Close DSW.
    02. LAN power control by wake on lan item and LAN controller item.
    
    Notes
    ------------------
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000001A:
    SANDYBRIDGE Q0 M12206A7_0000001A:              
    =================================================
    BIOS Version:                A03
    Release Date:                2011/09/29
    VBIOS:                       2102
    PSA Version:                 PSA4214 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-A03.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x72B6
    Dword checksum: 0x2BF872B6
    CRC-32:         0xED0882D2
    
    Input filename: MS-A03.exe
    Word checksum:  0xF804
    Dword checksum: 0x1FFFF804
    CRC-32:         0x820EE547
    
    Input filename: BIOS-A03.ROM (system BIOS only)
    Word checksum:  0xED42
    Dword checksum: 0x1831ED42
    CRC-32:         0xDF0E62EC
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. X22 turn to A03. 
    
    Notes
    ------------------
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000001A:
    SANDYBRIDGE Q0 M12206A7_0000001A:              
    =================================================
    BIOS Version:                X22
    Release Date:                2011/09/23
    VBIOS:                       2102
    PSA Version:                 PSA4214 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X22.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0xDDC1
    Dword checksum: 0x2BF6DDC1
    CRC-32:         0x4FE5D495
    
    Input filename: MS-X22.exe
    Word checksum:  0x27A0
    Dword checksum: 0x1FFF27A0
    CRC-32:         0xB2388011
    
    Input filename: BIOS-X22.ROM (system BIOS only)
    Word checksum:  0x584D
    Dword checksum: 0x1830584D
    CRC-32:         0x7DE334AB
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. Update A4214A0 ePSA ROM to correct (DF466316 Title:   Mission Hills BIOS does not support ePSA Event Tab). 
    02. Set the methods of LNKA ~LNKH from NotSerialized to Serialized (A method that is serialized cannot be reentered by additional threads.) 
        to correct FIDA imageinstall issue in factory sometimes.
    
    
    Notes
    ------------------
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000001A:
    SANDYBRIDGE Q0 M12206A7_0000001A:              
    =================================================
    BIOS Version:                A02
    Release Date:                2011/07/27
    VBIOS:                       2102
    PSA Version:                 PSA4212 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-A02.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x4561
    Dword checksum: 0x2BFC4561
    CRC-32:         0xBA78908C
    
    Input filename: MS-A02.exe
    Word checksum:  0xDE5C
    Dword checksum: 0x1FFCDE5C
    CRC-32:         0xBA7134ED
    
    Input filename: BIOS-A02.ROM (system BIOS only)
    Word checksum:  0xBFED
    Dword checksum: 0x1835BFED
    CRC-32:         0x887E70B2
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. X21 turn to A02
    
    Notes
    ------------------
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000001A:
    SANDYBRIDGE Q0 M12206A7_0000001A:              
    =================================================
    BIOS Version:                X21
    Release Date:                2011/07/07
    VBIOS:                       2102
    PSA Version:                 PSA4212 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X21.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x670A
    Dword checksum: 0x2BFB670A
    CRC-32:         0xFF695E83
    
    Input filename: MS-X21.exe
    Word checksum:  0x79B2
    Dword checksum: 0x1FFD79B2
    CRC-32:         0xB9B280D4
    
    Input filename: BIOS-X21.ROM (system BIOS only)
    Word checksum:  0xE196
    Dword checksum: 0x1834E196
    CRC-32:         0xCD6FBEBD
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. SANDYBRIDGE D2 AND Q0 M12206A7_00000018 -> SANDYBRIDGE D2 AND Q0 M12206A7_0000001A
    
    Notes
    ------------------
    01. MicroCode update is for G440 S3/S4 resume fail.
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000018:
                  
    =================================================
    BIOS Version:                A01
    Release Date:                2011/06/15
    VBIOS:                       2102
    PSA Version:                 PSA4212 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-A01.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x8C30
    Dword checksum: 0x2BFA8C30
    CRC-32:         0xA6E3A3DC
    
    Input filename: MS-A01.exe
    Word checksum:  0xB738
    Dword checksum: 0x1FFCB738
    CRC-32:         0xEDF32646
    
    Input filename: BIOS-A01.ROM (system BIOS only)
    Word checksum:  0x06BC
    Dword checksum: 0x183406BC
    CRC-32:         0x94E543E2
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. X20 turn to A01.
    
    Notes
    ------------------
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000018:
                  
    =================================================
    BIOS Version:                X20
    Release Date:                2011/06/10
    VBIOS:                       2102
    PSA Version:                 PSA4212 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X20.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x81B8
    Dword checksum: 0x2BFA81B8
    CRC-32:         0x23BAFC84
    
    Input filename: MS-X20.exe
    Word checksum:  0xA61B
    Dword checksum: 0x1FFAA61B
    CRC-32:         0xC111BAF4
    
    Input filename: BIOS-X20.ROM (system BIOS only)
    Word checksum:  0xFC44
    Dword checksum: 0x1833FC44
    CRC-32:         0x11BC1CBA
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. "Intel(R) Sandy Bridge D2 and Q0" M12206A7_00000014.PDB  ->  M12206A7_00000018.PDB
    02. Adjust fan curves to cover the sustaining addition CPUs
    
    Notes
    ------------------
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X19
    Release Date:                2011/05/21
    VBIOS:                       2102
    PSA Version:                 PSA4212 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X19.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x8E3B
    Dword checksum: 0x2BFE8E3B
    CRC-32:         0xC98E8CD6
    
    Input filename: MS-X19.exe
    Word checksum:  0x0B0F
    Dword checksum: 0x1FF80B0F
    CRC-32:         0x5DD118DB
    
    Input filename: BIOS-X19.ROM (system BIOS only)
    Word checksum:  0x08C7
    Dword checksum: 0x183808C7
    CRC-32:         0xFB886CE8
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01.  IRQ re-assign.
    
    Notes
    ------------------
    1. IRQ assignment
               X00 BIOS     A00 BIOS    X19 BIOS
                IRQ           IRQ         IRQ 
    IGD          B             B           B
    LAN          B             B           B
    SATA0        B             B           5
    SATA1        B             B           5
    EHCI0        7             7           7
    EHCI1        B             B           A
    Audio        A             A           5
    SMBUS        A             A           7
    ME           B             B           A
    SLOT1/PEG    B             B           B
    SLOT2        5             5           A
    SLOT3        A             A           7
    SLOT4        B             B           5 
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X18
    Release Date:                2011/05/19
    VBIOS:                       2102
    PSA Version:                 PSA4212 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X18.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x0C08
    Dword checksum: 0x2BFE0C08
    CRC-32:         0x80772E53
    
    Input filename: MS-X18.exe
    Word checksum:  0x1E46
    Dword checksum: 0x1FF91E46
    CRC-32:         0xA844E6F5
    
    Input filename: BIOS-X18.ROM (system BIOS only)
    Word checksum:  0x8694
    Dword checksum: 0x18378694
    CRC-32:         0xB271CE6D
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01.  Modify VBIOS setting : [Integrated DisplayPort with HDMI/DVI compatitable] to [Integrated HDMI/DVI] 
    02.  Modify VBIOS setting : [Hot Plug Support in BIOS] from Enable to Disable
    03.  ePSA PSA4209 -> PSA4212 : [Audio cable detect] Required to Optional
    
    Notes
    ------------------
    1. 
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X17
    Release Date:                2011/05/05
    VBIOS:                       2102
    PSA Version:                 PSA4209 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X17.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x70AF
    Dword checksum: 0x2C0A70AF
    CRC-32:         0xB82F4F23
    
    Input filename: MS-X17.exe
    Word checksum:  0x0EA5
    Dword checksum: 0x1FF50EA5
    CRC-32:         0x60E86EFE
    
    Input filename: BIOS-X17.ROM (system BIOS only)
    Word checksum:  0xEB3B
    Dword checksum: 0x1843EB3B
    CRC-32:         0x8A29AF1D
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01.  System shows RTC failure message in "Normal mode" because BIOS don¡¦t clear RTC failure flag in "Manufactory Mode".
    02.  ME will keep failing after flashing BIOS without changing ME jumper to correct direction on next boot.
    
    Notes
    ------------------
    1. 
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                A00
    Release Date:                2011/04/12
    VBIOS:                       2102
    PSA Version:                 PSA4209 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-A00.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x37BD
    Dword checksum: 0x2C0A37BD
    CRC-32:         0x4B2A4D27
    
    Input filename: MS-A00.exe
    Word checksum:  0x5884
    Dword checksum: 0x1FF15884
    CRC-32:         0x768D076E
    
    Input filename: BIOS-A00.ROM (system BIOS only)
    Word checksum:  0xB249
    Dword checksum: 0x1843B249
    CRC-32:         0x792CAD19
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. Support "Get Number of Valid Samples" and "Get Number of Sampling Intervals" for fan testing. 
    
    Notes
    ------------------
    1. Changing BIOS Version from X16 to A00. 
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.2.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X16
    Release Date:                2011/04/07
    VBIOS:                       2102
    PSA Version:                 PSA4209 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X16.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0xBA90
    Dword checksum: 0x2C09BA90
    CRC-32:         0x0491E554
    
    Input filename: MS-X16.exe
    Word checksum:  0x4033
    Dword checksum: 0x1FF24033
    CRC-32:         0x719FE84E
    
    Input filename: BIOS-X16.ROM (system BIOS only)
    Word checksum:  0x351C
    Dword checksum: 0x1843351C
    CRC-32:         0x3697056A
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. 
    
    Notes
    ------------------
    1. [Module Update Synchronizing with AMI]Intel SandyBridge 4.6.4_Intel_SNB_040
    2. Update new graphics for wrong VGA port.
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.2.0 
    BIOS Spec.  	: 1.1.1 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X15
    Release Date:                2011/03/31
    VBIOS:                       2102
    PSA Version:                 PSA4209 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X15.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0xB1C2
    Dword checksum: 0x2C7BB1C2
    CRC-32:         0xBF2117E1
    
    Input filename: MS-X15.exe
    Word checksum:  0x8D63
    Dword checksum: 0x1F798D63
    CRC-32:         0xD46B58AD
    
    Input filename: BIOS-X15.ROM (system BIOS only)
    Word checksum:  0x2C4E
    Dword checksum: 0x18B52C4E
    CRC-32:         0x8D27F7DF
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. DF464052 : Four USB ports is failure in system with USB card reader during posting.
    02. DF464038 : "WOL from S4/S5" item can editable during admin password locked status.
    
    Notes
    ------------------
    1. [Module Update Synchronizing with AMI]Intel Chipset Reference Board-SugarBay 4.6.4.0_VEB_1AOQI017.
    2. [Module Update Synchronizing with AMI]Intel CougarPoint 4.6.4_Intel_CPT_040.
    3. [Module Update Synchronizing with AMI]Intel SandyBridge 4.6.4_Intel_SNB_037
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.1-1 
    BIOS Spec.  	: 1.1.1 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X14
    Release Date:                2011/03/17
    VBIOS:                       2102
    PSA Version:                 PSA4209 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X14.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x314E
    Dword checksum: 0x2C7E314E
    CRC-32:         0x4CFEB364
    
    Input filename: MS-X14.exe
    Word checksum:  0xAA49
    Dword checksum: 0x1F7BAA49
    CRC-32:         0x5C564BC7
    
    Input filename: BIOS-X14.ROM (system BIOS only)
    Word checksum:  0xABDA
    Dword checksum: 0x18B7ABDA
    CRC-32:         0x7EF8535A
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. DF447530 : Cables test failed in ePSA testing.
    02. Modify MH/SG(MT/ST) HWM settings.
    03. The system can't always enter "HDD protecting" as attached PS/2 keyboard.
    04. Modified fan duty and tolerant based on value which come from thermal team.
    05. The system can't enter ePSA as "HDD protecting" item Enable.
    
    Notes
    ------------------
    1. Update EPSA 4208 TO EPSA 4209.
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.1-1 
    BIOS Spec.  	: 1.1.1 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X13
    Release Date:                2011/03/10
    VBIOS:                       2102
    PSA Version:                 PSA4208 
    ME FW:                       1065
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X13.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x579F
    Dword checksum: 0x2C83579F
    CRC-32:         0x763F99F1
    
    Input filename: MS-X13.exe
    Word checksum:  0xD91F
    Dword checksum: 0x1F76D91F
    CRC-32:         0xBA83A68A
    
    Input filename: BIOS-X13.ROM (system BIOS only)
    Word checksum:  0xD22B
    Dword checksum: 0x18BCD22B
    CRC-32:         0x443979CF
    
    Input filename: ME1065.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x5EF1
    Dword checksum: 0x13975EF1
    CRC-32:         0x91809BE9        
    
    Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x4FC9
    Dword checksum: 0x104A4FC9
    CRC-32:         0x08FDCFCC       
    
    Fixes/Enhancements
    ------------------
    01. Added USB card reader VID/PID.
    
    Notes
    ------------------
    1. Update ME firmware from 7.0.10.1203 to 7.1.10.1065.
    2. [Module Update Synchronizing with AMI]Intel CougarPoint 4.6.4_Intel_CPT_039.
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.1-1 
    BIOS Spec.  	: 1.1.1 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X12
    Release Date:                2011/03/03
    VBIOS:                       2102
    PSA Version:                 PSA4208 
    ME FW:                       1203
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X12.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x24BD
    Dword checksum: 0x2D3A24BD
    CRC-32:         0x1564B050
    
    Input filename: MS-X12.exe
    Word checksum:  0xCA1B
    Dword checksum: 0x1E07CA1B
    CRC-32:         0xE75A18E7
    
    Input filename: BIOS-X12.ROM (system BIOS only)
    Word checksum:  0xD835
    Dword checksum: 0x18BCD835
    CRC-32:         0xAC541387
    
    Input filename: ME1203.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x2605
    Dword checksum: 0x144E2605
    CRC-32:         0x21DD1C54         
    
    Input filename: 1203upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x177D
    Dword checksum: 0x1101177D
    CRC-32:         0xBB604E66       
    
    Fixes/Enhancements
    ------------------
    01. DF456569 MS: WPE BiosLoadDefault.exe tool hangs. 
    02. DF456214 MS: nVidia GTS420 (M207 test) hangs on Missionhills and Sawgrass.
    
    Notes
    ------------------
    1. Update ME firmware from 1197 to 1203.
    2. Add cmpmever.exe in "Tools for Manufacturing\MECMP" folder.
    3. Add MEver.txt in "Tools for Manufacturing" folder.
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.1-1 
    BIOS Spec.  	: 1.1.1 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X11
    Release Date:                2011/02/24
    VBIOS:                       2102
    PSA Version:                 PSA4208 
    ME FW:                       1197
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X11.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0xC455
    Dword checksum: 0x2D37C455
    CRC-32:         0x4BBB6963
    
    Input filename: MS-X11.exe
    Word checksum:  0xF14E
    Dword checksum: 0x1E02F14E
    CRC-32:         0x70ADE7D2
    
    Input filename: BIOS-X11.ROM (system BIOS only)
    Word checksum:  0x71F0
    Dword checksum: 0x18BA71F0
    CRC-32:         0x68843085
    
    Input filename: ME1197.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x2C32
    Dword checksum: 0x144E2C32
    CRC-32:         0x91419A3E          
    
    Input filename: 1197upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x1DD4
    Dword checksum: 0x11011DD4
    CRC-32:         0x2DE8F69C       
    
    Fixes/Enhancements
    ------------------
    01. Reserved variable for stabilizing NVRAM block.
    02. GPIO72(control USB power) action invert when BIOS get BOARD_ID(GPIO20, GPIO67) equal 0.
    03. Taked out data of setupmenu backup function when system is form MFG mode to Normal mode.
    04. Added PS/2 keyboard and mouse detect function by CMOS(0x5F) setting for factory.
    05. ME setting is for CPU Softsku on MH/SG.
    06. Modify Conexant verb table to turn off internal speaker.
    
    Notes
    ------------------
    1. WARNING-WARNING: Beause X11 BIOS has changed NVRAM block, please use FPT.EXE to flash whole SPI ROM.
    2. [Module Update Synchronizing with AMI]Intel SandyBridge 			4.6.4_Intel_SNB_036 
    3. [Module Update Synchronizing with AMI]USB 			                08.10.01  
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.1-1 
    BIOS Spec.  	: 1.1.1 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X10
    Release Date:                2011/02/17
    VBIOS:                       2102
    PSA Version:                 PSA4208 
    ME FW:                       1197
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X10.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x9642
    Dword checksum: 0x2D399642
    CRC-32:         0x1003C1B6
    
    Input filename: MS-X10.exe
    Word checksum:  0x3B8A
    Dword checksum: 0x1E063B8A
    CRC-32:         0x2E447151
    
    Input filename: BIOS-X10.ROM (system BIOS only)
    Word checksum:  0x444D
    Dword checksum: 0x18BC444D
    CRC-32:         0x2EF975F1
    
    Input filename: ME1197.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x2BC2
    Dword checksum: 0x144E2BC2
    CRC-32:         0x2CD58C91          
    
    Input filename: 1197upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x1DD4
    Dword checksum: 0x11011DD4
    CRC-32:         0x2DE8F69C       
    
    Fixes/Enhancements
    ------------------
    01. DF444343  MS: HDD and ODD priorities can't back to default after clear CMOS by jumper.
    02. DF452835  MS: "Hyper-threading" setting return to default value after leave "Mfg mode".
    03. Closed LAN LED when system is in S0 and disable "Onboard LAN controller".
    04. Logo issue is about PS/2 keyboard/Mouse and SMBIOS Type 0xDA / 0x11.
    05. Closed USB port0/port1 when disable "Onboard card reader" item.
    06. Set different SSID and SVID to Realtek LAN device to differ MissionHill and SawGrass.
    
    Notes
    ------------------
    1. Update EPSA 4207 TO EPSA 4208.
    2. [Module Update Synchronizing with AMI]Intel Chipset Reference Board-SugarBay 4.6.4.0_VEB_1AOQI016.
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.1-1 
    BIOS Spec.  	: 1.1.1 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X09
    Release Date:                2011/02/10
    VBIOS:                       2102
    PSA Version:                 PSA4207 
    ME FW:                       1197
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X09.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0xFB0F
    Dword checksum: 0x2D3FFB0F
    CRC-32:         0xFD3B5EB6
    
    Input filename: MS-X09.exe
    Word checksum:  0x0EE9
    Dword checksum: 0x1E010EE9
    CRC-32:         0xC03AA94D
    
    Input filename: BIOS-X09.ROM (system BIOS only)
    Word checksum:  0xA91A
    Dword checksum: 0x18C2A91A
    CRC-32:         0xC3C1EAF1
    
    Input filename: ME1197.bin (ME FW only, for FITC and FPT)
    Word checksum:  0x2BC2
    Dword checksum: 0x144E2BC2
    CRC-32:         0x2CD58C91          
    
    Input filename: 1197upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0x1DD4
    Dword checksum: 0x11011DD4
    CRC-32:         0x2DE8F69C       
    
    Fixes/Enhancements
    ------------------
    01. DF450865 MS: SUT can be wake up by WOL, after disable LOM controller in BIOS Setup.
    02. DF450883 S: 19 in 1 Card Reader shown on the Boot Menu(BBS).
    
    Notes
    ------------------
    1. Update ME firmware from 1184 to 1197.
    2. [Module Update Synchronizing with AMI]Intel CougarPoint 4.6.4_Intel_CPT_038 (in order to support B3 stepping chipset).
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.1-1 
    BIOS Spec.  	: 1.1.1 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X08
    Release Date:                2011/01/27
    VBIOS:                       2102
    PSA Version:                 PSA4207 
    ME FW:                       1184
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X08.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0xAFF7
    Dword checksum: 0x2D42AFF7
    CRC-32:         0x93DF37F6
    
    Input filename: MS-X08.exe
    Word checksum:  0x0886
    Dword checksum: 0x1DF90886
    CRC-32:         0xC11714A0
    
    Input filename: BIOS-X08.ROM (system BIOS only)
    Word checksum:  0xD97D
    Dword checksum: 0x18C4D97D
    CRC-32:         0xD6460731
    
    Input filename: ME1184.bin (ME FW only, for FITC and FPT)
    Word checksum:  0xB047
    Dword checksum: 0x144EB047
    CRC-32:         0x523AA00C           
    
    Input filename: 1184upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0xA294
    Dword checksum: 0x1101A294
    CRC-32:         0x55FD546F        
    
    Fixes/Enhancements
    ------------------
    01. DF446774 MS: After clear CMOS by jumper the Service Tag turn out to blanked. 
    02. DF448747 MS: Onboard HDMI audio appears after SUT resume from S3 (add-on GFX installed).
    03. DF449872 MS: SUT cannot enter to S3/S4 after disable the USB controller in BIOS.
    04. Changing the style of MissionHill's setup help frame
    
    Notes
    ------------------
    
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.1-1 
    BIOS Spec.  	: 1.1.1 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000014:
                  
    =================================================
    BIOS Version:                X07
    Release Date:                2011/01/20
    VBIOS:                       2102
    PSA Version:                 PSA4207 
    ME FW:                       1184
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X07.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0xF781
    Dword checksum: 0x2D43F781
    CRC-32:         0x3F8F4BE8
    
    Input filename: MS-X07.exe
    Word checksum:  0xFC32
    Dword checksum: 0x1DF7FC32
    CRC-32:         0xB641C149       
    
    Input filename: BIOS-X07.ROM (system BIOS only)
    Word checksum:  0x2107
    Dword checksum: 0x18C62107
    CRC-32:         0x7A167B2F
    
    Input filename: ME1184.bin (ME FW only, for FITC and FPT)
    Word checksum:  0xB047
    Dword checksum: 0x144EB047
    CRC-32:         0x523AA00C           
    
    Input filename: 1184upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0xA294
    Dword checksum: 0x1101A294
    CRC-32:         0x55FD546F        
    
    Fixes/Enhancements
    ------------------
    01. DF443896  MS: An incorrect error message during POST if SATA port only attach non-boot HDD. 
    02. DF444333  S: Keyboard failure message appear when we only attach PS/2 keyboard. 
    03. DF443646  S: Serial mouse has no function in EDIT.com 
    
    Notes
    ------------------
    1. Update integrated VBIOS version from 2098 to 2102.
    2. Update Intel(R) Sandy Bridge D2 and Q0 microcode version from M12206A7_00000012.pdb to M12206A7_00000014.pdb.
    3. Update ME firmware from 1164 to 1184.
    4. [Module Update Synchronizing with AMI]Intel CougarPoint 			4.6.4_Intel_CPT_036 
    5. [Module Update Synchronizing with AMI]Intel SandyBridge 			4.6.4_Intel_SNB_035 
    6. Update EPSA 4206 TO EPSA 4207
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.0.0 
    BIOS Spec.  	: 1.0.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_00000012:
                  
    =================================================
    BIOS Version:                X06
    Release Date:                2011/01/13
    VBIOS:                       2098
    PSA Version:                 PSA4206 
    ME FW:                       1164
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X06.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0xE103
    Dword checksum: 0x2D4DE103
    CRC-32:         0x2C537712
    
    Input filename: MS-X06.exe
    Word checksum:  0xECE4
    Dword checksum: 0x1DF2ECE4
    CRC-32:         0x4A1D8391          
    
    Input filename: BIOS-X06.ROM (system BIOS only)
    Word checksum:  0xCECF
    Dword checksum: 0x18CFCECF
    CRC-32:         0x65621626
    
    Input filename: ME1164.bin (ME FW only, for FITC and FPT)
    Word checksum:  0xF370
    Dword checksum: 0x144EF370
    CRC-32:         0xF6FF9838           
    
    Input filename: 1164upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0xE4A9
    Dword checksum: 0x1101E4A9
    CRC-32:         0x184C7FE7         
    
    Fixes/Enhancements
    ------------------
    01. DF438519: CPU model name does not fully shown in BIOS Setup 
    02. DF438530: TSST, HLDS, Optiarc, TEAC ODD model name does not fully shown in BIOS Setup 
    03. DF441195: Display will turn on after being waked up by magic packet from S3. 
    04. DF443899: No alert message during POST after disabled all devices in the boot sequence.  
    05. DF444845: Some Type have incorrect values in SMBIOS table. 
    06. Change error pictures for MT and ST when inserts wrong VGA port in the system with final external graphic.  
    07. Close integrated HDMI port while using VGA card and disabling "Intel Multiple Monitor Feature". 
    
    
    Notes
    ------------------
    1. Update integrated VBIOS version from 2089 to 2098.
    2. Update Intel(R) Sandy Bridge D2 and Q0 microcode version from M12206A7_0000000D.pdb to M12206A7_00000012.pdb.
    3. Added vendor EON rom to VSCC table in ME setting.
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.0.0 
    BIOS Spec.  	: 1.0.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000000D:
                  
    =================================================
    BIOS Version:                X05
    Release Date:                2011/01/06
    VBIOS:                       2089
    PSA Version:                 PSA4206 
    ME FW:                       1164
    HDD Protection ROM Version:  V2.20
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X05.BIN (system BIOS + ME FW, for programmer)
    Word checksum:  0x396E
    Dword checksum: 0x2E50396E
    CRC-32:         0x249C2F3A
    
    Input filename: MS-X05.exe
    Word checksum:  0x6BC1
    Dword checksum: 0x1CE36BC1
    CRC-32:         0x07B95A7D                 
    
    Input filename: BIOS-X05.ROM (system BIOS only)
    Word checksum:  0x1FF0
    Dword checksum: 0x19D21FF0
    CRC-32:         0xB9A824B2
    
    Input filename: ME1164.bin (ME FW only, for FITC and FPT)
    Word checksum:  0xF370
    Dword checksum: 0x144EF370
    CRC-32:         0xF6FF9838             
    
    Input filename: 1164upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0xE4A9
    Dword checksum: 0x1101E4A9
    CRC-32:         0x184C7FE7          
    
    Fixes/Enhancements
    ------------------
    01. DF438550  M: Service tag blanked after load BIOS deafault 
    02. DF440417  MS: Cannot disable WOL function in BIOS setup menu 
    03. DF442422  MS: i3 CPU L2 cache size shown incorrectly in the BIOS Setup 
    04. DF443285  MS:PS2 KB LED keeps bright status after SUT run into S3.
    05. DF443887  MS: An incorrect error message during POST if no SATA port has been attached 
    06. DF443899  MS: No alert message during POST after disabled all devices in the boot sequence 
    07. DF444383  MS: Incorrect information General Help(F1 key) in BIOS setup menu 
    08. DF444841  MS: System can't auto reboot after flash BIOS using the "/nopause" switch.
    09. DF444845  MS: Some Type have incorrect values in SMBIOS table.
    11. Add "SMART error message" for 5.3 POST Fault Isolation
    12. Correct HDD Protection OPROM sometimes has lower boot priority than HDD.
    13. In MFG mode returns SLP, HDD Protection to ¡§Enable and unlock status¡¨ and hides Estar logo.
    14. Let Dell Tag checksum, Asset Tag and EPPID default to FF for faster program in ICT. 
    15. Correct HDD Protection item disappear after load BIOS default. 
    16. Following Fan failure detect flow chart wiht (MissionHill FAN flow chart20110105.doc).
    
    Notes
    ------------------
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.0.0 
    BIOS Spec.  	: 1.0.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000000D:
                  
    =================================================
    BIOS Version:                X04
    Release Date:                2010/12/30
    VBIOS:                       2089
    PSA Version:                 PSA4206 
    ME FW:                       1164
    RAID ROM Version:            N/A
    HDD Protection ROM Version:  N/A
    LAN PXE ROM:                 2.38
    
    Input filename: MS-X04.ROM (system BIOS + ME FW, for programmer)
    Word checksum:  0xB80E
    Dword checksum: 0x2E5BB80E
    CRC-32:         0x6C10DF13
    
    Input filename: MS-X04.exe
    Word checksum:  0xB978
    Dword checksum: 0x1CDBB978
    CRC-32:         0xC3BA6F0C                  
    
    Input filename: BIOS-X04.ROM (system BIOS only)
    Word checksum:  N/A 
    Dword checksum: N/A 
    CRC-32:         N/A 
    
    Input filename: ME1164.bin (ME FW only, for FITC and FPT)
    Word checksum:  0xF370
    Dword checksum: 0x144EF370
    CRC-32:         0xF6FF9838              
    
    Input filename: 1164upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0xE4A9
    Dword checksum: 0x1101E4A9
    CRC-32:         0x184C7FE7          
    
    Fixes/Enhancements
    ------------------
    01. DF440478  MS: SUT will resume from S4 immediately 
    02. DF441680  MS: Fans tests fail via press F12 to run Diagnostics(ePSA) with MS-X02 
    03. DF441686  MS: Admin/system password will be clear after clear CMOS by jumper. 
    04. DF442149  MS:SUT unable to skip non-bootable HDD when resume from S4 at the 2nd time. 
    05. DF442595  MS: SUT will not pause the POST when Pause/Break key pressed during POST. 
    06. DF442603  MS: Beeps code should alert when booting the system without memory. 
    07. DF443262  MS: SUT cannot be waked up from S3 via PS2 KB&MS.
    08. 2.13 Flash Requirements
    09. 2.14 Flash Filename Naming Convention
    10. 16 Dell Look and Feel Setup Engine
    11. Eup Requirement=> 
    Enable Deep S5 when the item "Wake on Lan from S4/S5" is "Disabled".
    12. HDD Protection=>
    Sometims the HDD Protection OPROM has lower boot priority than other bootable device. Under debugging the issue. 
    
    Notes
    ------------------
    1. [Module Update Synchronizing with AMI]Intel CougarPoint 			4.6.4_Intel_CPT_032 
    2. [Module Update Synchronizing with AMI]Chipset Reference Board - SugarBAY 	4.6.4.0_VEB_1AOQI015
    3. [Module Update Synchronizing with AMI]Sugarbay SNB Specific Code 		4.6.3_ SugarBaySNB _3-Beta1
    4. [Module Update Synchronizing with AMI]Intel Nehalem 				4.6.3_INTEL_Nehalem_36
    5. [Module Update Synchronizing with AMI]Flash-Source 				4.6.3_Flash_Combined_2_26
    6. Update PXE ROM to 2.38
    7. Update ME firmware to 1164
    8. Release BIOS(Win and Dos) utility package v1.00
    (*)9. Please useing FPT tool to flash BIOS because ME firmware update to 1164.(*)
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.0.0 
    BIOS Spec.  	: 1.0.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000000D:
    
    =================================================
    BIOS Version:                X03
    Release Date:                2010/12/23
    VBIOS:                       2089
    PSA Version:                 PSA4206 
    ME FW:                       1141
    RAID ROM Version:            N/A
    HDD Protection ROM Version:  N/A
    LAN PXE ROM:                 2.37
    
    Input filename: MS-X03.ROM (system BIOS + ME FW, for programmer)
    Word checksum:  0x4367
    Dword checksum: 0x2E8A4367
    CRC-32:         0x51A8E2D3
    
    Input filename: MS-X03.exe
    Word checksum:  N/A 
    Dword checksum: N/A
    CRC-32:         N/A                    
    
    Input filename: BIOS-X03.ROM (system BIOS only)
    Word checksum:  N/A 
    Dword checksum: N/A 
    CRC-32:         N/A 
    
    Input filename: ME1141.bin (ME FW only, for FITC and FPT)
    Word checksum:  0xC10E
    Dword checksum: 0x1451C10E
    CRC-32:         0x79E8DB71               
    
    Input filename: 1141upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0xB270
    Dword checksum: 0x1104B270
    CRC-32:         0xCCB45E59           
    
    Fixes/Enhancements
    ------------------
    1. DF439700  MS: No alert message after press CTRL-ALT-DEL 3 time at BIOS loading bar. 
    2. DF439712  MS: Admin/system password can set non-ASCII 20h ¡V 7Eh characters. 
    3. DF440478  MS: SUT will resume from S4 immediately
    4. 5.1 Memory SPD Data in SMBIOS Type 17(11h) 
    5. 5.3 POST Fault Isolation
    6. Bios requirement from Ubuntu Linux
    7. 3.2 Fan Test Interface
    
    
    Notes
    ------------------
    1. [Module Update Synchronizing with AMI]	  Intel CougarPoint 4.6.4_Intel_CPT_031 
    2. [Module Update Synchronizing with AMI]	  Intel SandyBridge 4.6.4_Intel_SNB_031
    
    
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.0.0 
    BIOS Spec.  	: 1.0.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000000D:
    
    =================================================
    BIOS Version:                X02
    Release Date:                2010/12/16
    VBIOS:                       2089
    PSA Version:                 PSA4206 
    ME FW:                       1141
    RAID ROM Version:            N/A
    HDD Protection ROM Version:  N/A
    LAN PXE ROM:                 2.37
    
    Input filename: MS-X02.ROM (system BIOS + ME FW, for programmer)
    Word checksum:  0x13DD
    Dword checksum: 0x2E9C13DD
    CRC-32:         0x219F198D
    
    Input filename: MS-X01.exe
    Word checksum:  N/A 
    Dword checksum: N/A
    CRC-32:         N/A                    
    
    Input filename: BIOS-X00.ROM (system BIOS only)
    Word checksum:  N/A 
    Dword checksum: N/A 
    CRC-32:         N/A 
    
    Input filename: ME1141.bin (ME FW only, for FITC and FPT)
    Word checksum:  0xC10E
    Dword checksum: 0x1451C10E
    CRC-32:         0x79E8DB71               
    
    Input filename: 1141upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0xB270
    Dword checksum: 0x1104B270
    CRC-32:         0xCCB45E59           
    
    Fixes/Enhancements
    ------------------
    01.DF438551  M: No CPU/system fan failure message 
    02.DF438573  M: No alert message display at POST after removing Coin cell 
    03.DF438574  M: No alert message after CMOS clear by jumper 
    04.DF438575  M: SUT power on with Last state of AC recovery test in S4 
    05.DF438586  M: Admin PSWD charactors amount does not meet the spec 
    06.DF438588  MS: System hang when press ESC once at BIOS PSWD prompt during POST 
    07.DF438617  M: System PSWD is not cleared after clear Administrator 
    08.DF438622  M: SUT does not shutdown automatically when PSWD failed 3 times 
    09.DF438624  M: No keyboard error message appears during POST when no keyboard attached 
    10.DF439712  MS: Admin/system password can set non-ASCII 20h ¡V 7Eh characters. 
    11.DF439742  MS: Load Default function has been inactive. 
    12.DF439798  MS: SUT halts by CPU fan error message in the POST.
    
    
    Notes
    ------------------
    1. Change PSA4204 to PSA4206
    2. Use graphic instead of text string when user inserts wrong VGA port.
    3. MissionHill/SawGress MT fan detect CPU fan and SYSTEM fan2.
    4. MissionHill/SawGress ST fan detect CPU fan and SYSTEM fan1.
    
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.0.0 
    BIOS Spec.  	: 1.0.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000000D:
    
    =================================================
    BIOS Version:                X01
    Release Date:                2010/12/09
    VBIOS:                       2089
    PSA Version:                 PSA4204 
    ME FW:                       1141
    RAID ROM Version:            N/A
    HDD Protection ROM Version:  N/A
    LAN PXE ROM:                 2.37
    
    Input filename: MS-X01.ROM (system BIOS + ME FW, for programmer)
    Word checksum:  0x6B5B
    Dword checksum: 0x2FDE6B5B
    CRC-32:         0xDCCAE1A0               
    
    Input filename: MS-X01.exe
    Word checksum:  N/A 
    Dword checksum: N/A
    CRC-32:         N/A                    
    
    Input filename: BIOS-X00.ROM (system BIOS only)
    Word checksum:  N/A 
    Dword checksum: N/A 
    CRC-32:         N/A 
    
    Input filename: ME1141.bin (ME FW only, for FITC and FPT)
    Word checksum:  0xC10E
    Dword checksum: 0x1451C10E
    CRC-32:         0x79E8DB71               
    
    Input filename: 1141upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0xB270
    Dword checksum: 0x1104B270
    CRC-32:         0xCCB45E59           
    
    Fixes/Enhancements
    ------------------
    01. DF438562       ePSA is able to launched with pressing F8 during POST.
    02. DF438564       An additional option exist under Onboard Lan Controller.
    03. DF438567       BIOS doesn't disable boot function for internal USB card reader.
    04. DF438576       CMOS jumper is unable to clear system time clock.
    05. DF438573       No alert message display at POST after removing Coin cell.
    06. DF438574       No alert message after CMOS clear by jumper.
    07. DF438587       Serial port is not locked with login BIOS setup with User PSWD.
    08. DF438588       System hang when press ESC once at BIOS PSWD prompt during POST.
    09. DF438589       PSWD is unable to clear by Clear Password jumper.
    10. DF438618       User Password is instead of System Password.
    11. DF438622       SUT does not shutdown automatically when PSWD failed 3 times.
    12. Modifying HWM registers and Adding CPU Tcontrol offset is for thermal team.
    13. Adding Fan SMI interface function is for fan testing by Delldiag version 1392.
    14. Adding "wake on LAN" item in setup menu.
    15. Changing VBIOS to 2089.
    16. Adding CPU fan error function.
    
    Notes
    ------------------
    1. If the vender of main SPI ROM is "SST", please remove second SPI ROM from MB. 
    2. VBIOS version is 2089.
    
    
    ===============================================================================================
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ***********************************************************************************************
    ===============================================================================================
    
    System:	 Inspiron 620(s)/Vostro 260(s)
    SSID:	 04ED(Inspiron 620)/04EE(Vostro 260)
    CPU :	 Intel Sandy Bridge (LGA1155)
    SB : 	 Intel H61
    SuperIO: SCH5514E
    Flash :  SPI 32Mbits flash
    BIOS Code Base: AMI uEFI Aptio: 4.6.4.0
    
    =================================================
    MRC Revision	: 1.1.0.0 
    BIOS Spec.  	: 1.0.0 
    
    Microcode list(CPU, Stepping, Microcode update: supported CPUs):
    SANDYBRIDGE B0 M12206A1_00000007:
    SANDYBRIDGE B2 M12206A2_00000026: 
    SANDYBRIDGE C0 M12206A3_00000008: 
    SANDYBRIDGE D0 M12206A5_00000007:  	
    SANDYBRIDGE D1 M12206A6_00000028: 
    SANDYBRIDGE D2 M12206A7_0000000D:
    
    =================================================
    BIOS Version:                X00
    Release Date:                2010/11/30
    VBIOS:                       2080
    PSA Version:                 PSA4204 
    ME FW:                       1141
    RAID ROM Version:            N/A
    HDD Protection ROM Version:  N/A
    LAN PXE ROM:                 2.37
    
    Input filename: MS-X00.bin (system BIOS + ME FW, for programmer)
    Word checksum:  0xC635
    Dword checksum: 0x30F2C635
    CRC-32:         0xF4B5D4CD                 
    
    Input filename: MS-X00.exe
    Word checksum:  N/A 
    Dword checksum: N/A
    CRC-32:         N/A                    
    
    Input filename: BIOS-X00.ROM (system BIOS only)
    Word checksum:  0xDF10
    Dword checksum: 0x1479DF10
    CRC-32:         0x91004844                           
    
    Input filename: ME1141.bin (ME FW only, for FITC and FPT)
    Word checksum:  0xC10E
    Dword checksum: 0x1451C10E
    CRC-32:         0x79E8DB71                
    
    Input filename: 1141upd.BIN (ME FW only, for FWUPDLcl)
    Word checksum:  0xB270
    Dword checksum: 0x1104B270
    CRC-32:         0xCCB45E59           
    
    Fixes/Enhancements
    ------------------
    1.First release.
    
    
    
    
    
    
    
    
    
    

    Report Unresolved Customer Service Issues here:

    Dell - Unresolved Customer Service Issues

    I do not work for Dell. I too am a user.

    The forum is primarily user to user, with Dell employees moderating.

  • thanks