Dell Mother board #E210882 specs and front switch connections

Desktop

Desktop
Desktop computer Forums (Audio, General Hardware, Video)

Dell Mother board #E210882 specs and front switch connections

This question is answered

hello alll , I have an older dell MB w/ this number ,. it is a 478 socket processr, I thnk it had a 2.6 Ghz in it . heat sink but no cpu fan,

it has 4 dimm slots for 184 pin ram,

1AGP slot

3 PCI slots ,.an onbrd VGA port ,5 onbrd sound ports/plug conns

ps2 mse and keybrd conns,..4 onbrd usb prts,..1 onbrd lan port

2 IDE conns ,. 1 flppy

2 SAta conns,

 I'm looking for front panel connection info to put this in a aftrmarket tower ,,.. any ideas ??? can't find much from dell

Verified Answer
  • Look for the Dell part numbers.  This is just a Guess.  The Dimension 4600 also says E210882  I think this means some kind of UL or other Listing.

    E210882

    LGA775

    DS/N CN-0M3918-70821-48C-03R0 :C/O CN

    DELL REV. A01

    AA C58993205

    Manufacturer: Intel (OEM for Dell)
    Dell Part#: M3918 DH682
    Dimension 4700
    Chipset: Intel D915 D915GOK 915G Express
    Socket: LGA775
    Front Side Bus Speed: 800Mhz FSB
    Supported CPUs: Intel Pentium
    4 processor 520, 530, 540, 550, 560, or 570 with HT Technology - Intel P4 that runs at 2.8, 3.0, 3.2, 3.4, 3.6, and 3.8 GHz
    Other Features:
    Hyper-Threading Technology Support
    Supported Memory:
    400-MHz (PC-3200) and 533-MHz (PC-4300) DDR2

    Report Unresolved Customer Service Issues here

    I do not work for Dell. I too am a user.

    The forum is primarily user to user, with Dell employees moderating.

All Replies
  • Hi guttwrench,

    That number is not the model of the motherboard. However, even if you knew the motherboard, Dell does not provide pinout information for the front panel connectors. In fact, putting a Dell motherboard in a non-Dell case is usually an exercise in futility.

  • Look for the Dell part numbers.  This is just a Guess.  The Dimension 4600 also says E210882  I think this means some kind of UL or other Listing.

    E210882

    LGA775

    DS/N CN-0M3918-70821-48C-03R0 :C/O CN

    DELL REV. A01

    AA C58993205

    Manufacturer: Intel (OEM for Dell)
    Dell Part#: M3918 DH682
    Dimension 4700
    Chipset: Intel D915 D915GOK 915G Express
    Socket: LGA775
    Front Side Bus Speed: 800Mhz FSB
    Supported CPUs: Intel Pentium
    4 processor 520, 530, 540, 550, 560, or 570 with HT Technology - Intel P4 that runs at 2.8, 3.0, 3.2, 3.4, 3.6, and 3.8 GHz
    Other Features:
    Hyper-Threading Technology Support
    Supported Memory:
    400-MHz (PC-3200) and 533-MHz (PC-4300) DDR2

    Report Unresolved Customer Service Issues here

    I do not work for Dell. I too am a user.

    The forum is primarily user to user, with Dell employees moderating.

  • this helped,.AndI did find the pin outs for front panel on another sight,.. TY  tho,.

  • The 4600 has standard pinouts for the USB and front panel, but a Soundblaster-type connector for the front audio. The main problem with using it in a third party case is the proprietary heatsink that is designed to be cooled by the chassis fan, with the airflow directed via a plastic shroud that clips to be back of the chassis. I'm not sure how this could be retrofitted to a non-Dell case.

    One or two "custom PC" sites sold Soundblaster-to-AC97 adapter cables, but I'm not sure if they're still available.