I'm looking to squeeze a couple more years out of the 755 I use at my office, and I have some upgrade questions. It is a mini tower configuration with a Q6600 processor. Is there a chart that shows what processors can be used with the 0GM819 mobo? Will motherboards from any other series fit the 755 chassis?
No other motherboards do not fit nor do they work with the ribbon cable to the front panel.
After updating to the latest bios I would say up to 45nm Q9650 for the Mini Tower.
You would have to make sure that you get PC6400 DDR2 Ram if you do that.
UPDATE THE BIOS BEFORE trying to install a newer processor.
10/26/2011 2:11 AM 2239507 O755-A20.exeThe Dell spec for the desktop version lists the Q6600, Q9450, and Q9550 CPUs.http://www.dell.com/downloads/global/products/optix/en/opti_755_techspecs.pdf
The Q9650 worked in my minitower bios A20.
Report Unresolved Customer Service Issues here I do not work for Dell. I too am a user. The forum is primarily user to user, with Dell employees moderating.
Get Support on Twitter @DellCaresPro
The Crucial Kits are the exact ram I chose.
As for the processor suggestion, is there a specific reason for the Q9550 as opposed to the Q9650 or one of the QX9xxx?
Q9650 works but I don't know about the power in a SFF or SDT. Q9650 in SMT BIOS A20 = TOWER version does work YMMV.
In the USFF Forget it because It WILL NOT work due to the power brick being only 150W.
ALWAYS UPDATE BIOS BEFORE installing New Ram and New Processor or you will drive yourself crazy
trying to figure out which piece is broken.
PC6400 ram is required for the 1333mhz fsb CPU's
I had planned on upgrading to 8GB of PC8500 with 2 4Gb kits form Crucial.
It is the tower configuration, and my BIOS is at A20 already.
Why is DDR2 PC2-6400 RAM modules required with 1333 FSB C2D's?
Does it multifunction with DDR2 PC2-5300 RAM modules?
What is the best ram for C2D'S 1066 FSB?
Required Ram is based on Front Side Bus.
If your Front Side Bus is 800mhz then you need PC2-6400. DDR2 PC2-3200/4200 is NOT Supported in ANY configuration.
They recommend DDR2-800 so that you will not have a CPU that has an issue with the FSB. Keep in Mind that the VIDEO clock
minimum speed is 333 mhz and that system ram is shared with INTEL Graphics.
Motherboard is capable of clocking memory not only as DDR2-533, DDR2-667 and DDR2-800 but also as DDR2-1066 at a FSB frequency of 266MHz.
Uff, exhausting answer. Thank you very much for that. It makes perfect sense and I can report to my boss with confidence how to upgrade our PC's.
Very descriptive & helpful
I am looking for information also, I have a dell optiplex 755 desktop with a e6550 processor in it, I beleive it is listed as a q35 intel and would like to know if I could upgrade the processor also and if so what could I upgrade it too?