Hi (and thanks in advance!)
I'm having real trouble in restoring my Dell Inspiron 530 to factory settings. I've done this before on other machines with ease, but this one is proving really difficult. I'm running Windows Vista. Reason for reformatting is the machine is starting to run really slowly. Virus checks etc show nothing so I think it's just time for a cleanup.
I've looked through the Dell forums and other sites, but no joy.
To summarise what I've tried;
I have a Vista DVD, Dell Drivers & Utility Disk, but nothing labelled as a 'recovery disk' (I never received one originally and had assumed that it could be done through startup!)
The opening screen (with the dell logo) shows BIOS Revision 1.0.13 in case this is relevant.
Beyond this, I'm lost. How can I reformat the machine to the 'out of the box' state?
Any assistance anyone can provide would be greatly appreciated!
Thanks in advance,
If the Dell recovery partition is corrupted and unuseable you will have to do a manual install. There is no Dell "recovery" disc, just the Operating System DVD and the Drivers and Utility disc that you note you have. There may be some updated drivers on the Dell downloads, but use the supplied disc initially and then if you want to upgrade any drivers download and install them AFTER everything is working properly again. I530 Vista Downloads
HERE is the Dell manual install procedure. Before you do the actual complete reinstall, back up your user data to either an external hard drive or to CD's as part of the procedure is to reformat the hard drive. (DO NOT skip the Intel chipset drivers install sequence as that is key to a successful install).
I am not a Dell Employee
Dell forum member since 2002
Home Built PC with Gigabyte GA-Z77X-UD5H motherboard, i7 3770 CPU, Windows 7 64 bit Home/Win 8.1. SSD drive. Sonar X3c 64 bit Recordng Software.
Member of Nashville based R.O.P.E.
First off, thanks for replying so quickly!
This is pretty much what I have done already. I reinstalled Vista (have an external hdd so shifted everyhing I needed to keep to there)
However, the machine is still performing slowly (definitely not how it was when I originally purchased)
My question is; is restoring the machine to factory settings the same as reinstalling Windows Vista? I have already done this once and it left a 'backup' of the old version (called windows.old) on the system. Leads me to thinking that just reinstalling Windows isn't enough?
I may very well be wrong here and will happily stand corrected if this is the case!
Thanks so much again,
The proper "reinstallation" is to reformat the hard drive and reinstall everything, not just install Windows on a different folder or over top of an existing install as the same problems can still be there.
The "correct" and required install sequence for a successful install (disconnect any peripherals before starting) is (1) Install Windows (2) Install Dell System Software (3) Install Intel Chipset Drivers (4) Install Device Drivers such as the Dell Sound Drivers (not some other sound drivers), Video, ethernet, etc. After the install and all is working you can then reinstall your peripherals (e.g. printer) and install the applications programs (Programs must be installed they can't be copied over like user data).
I fear that may be the problem, the reinstall of Windows (following the Dell article you linked to) hasn't really impacted on the speed.
I'll have another go at reinstalling Windows a further time, incase that helps any.
Just to check;
What would be the standard procedure to reformat to factory settings with a system set up like mine? (where you cannot access F8, Cntrl F11). I'm curious as to how Dell expect you to reformat without being able to access these. I'm pretty confident the .wim file isn't corrupted (I haven't gone near it since I bought the computer) so how would one go about being able to use that file? It's effectively useless without being able to access it through Windows or through F8/F11. as far as I can see.
Really appreciate your help with this Fireberd.
The manual install procedure and correct install sequence is as I outlined in my original response. You boot from the Windows disc and allow Windows to reformat the hard drive and start the install.
The Inspiron 530s Chipset driver should be included in the Drivers and Utilities DVD sent with the computer packege.
It can also, be download from HERE to another computer and transfered to a USB thumb drive for installation on the 530s.
A hint: Don't use Dell's buggy Download Manager, use the download to my browser option instead.
Ps. Please don't use CAPS, as this implies that you are shouting, plus they are harder to read.
If my answer was helpful, please use the 'Did this answer the question' and click: YesForum Member since 2001I am not employed by Dell
Thank You, im going to try it today, i hope this works. And no more caps sorry. I ll let you know if it worked.
sjwmobile and firebird, I, too, have the same computer as sjwmobile, but I have a windows 7 upgrade disk as well. My biggest problem is my wmp12. No matter what I do in 'turn off and on features' my wmp12 will not rip cd's or hold music in the player. It always has to search to find my music. I got the windows 7 to be able to listen to my music in the family room with the big stereo. (Yes, it was cool when it worked.) Now over half of my music is gone and I can't get the player to rip, so I want to do a clean install. Is it safe to assume that I need to start with the windows vista disk and THEN put in my windows 7 upgrade, or can I start with the upgrade? I'm very new to this and I just don't want to mess it up as the whole family enjoys the computer and I don't want it to be down too long. Thanks for any help you can give
Follow my instructions below for best effect. Use you're Windows disc at step 3. There is no need to install Vista again.
Read to see what you need to download before starting and download everything onto an external hard drive. Such as Windows 7 Service Pack 1, Internet Explorer 9 and the system drivers.
Thanks for all of the info! I finally have everything backed up and the things downloaded to my external hard drive, so I am going to attempt to do this tomorrow afternoon! Wish me luck and I'll let you know if I was successful!
To restore your computer to the original factory installation, follow these steps:
what i repair is not an option that is given
If you are unable to use the system restore option, then you would need to perform a clean reinstall of Windows, follwed by loading the drivers and applications.
For more help. you will need to post the computer model and the version of Windows installed.