I have the above tower and on startup I just get 6 random audible beeps.
I presume this is a hardware error but dont know where to start
has anyone any ideas
any help would be greatly appreciated
The Beep Codes are here. You should also look at the Diagnostic Lights.
(Liaison for Desktops, Alienware, Monitors)Would you like to be a Dell Community Rockstar?
Yes is a HW failure Howard. Also it will help if you tell the pattern in which those are heard like 2-2-2 or 1-2-3 as they have a brief pause in between. Also if you can repply back with the numbers on the front. If the system is not posting it will have a combination of numbers that can give an idea of what is the problem.
Try opening the case, then remove and reseat the memory modules and see if it makes a difference.
If my answer was helpful, please use the 'Did this answer the question' and click: YesForum Member since 2001I am not employed by Dell
That beep code is a memory issue. It can be caused by one of two things: #1 the memory is not properly seated, or #2 the memory modules are not compatible with the machine. Check and see the speed of the memory. The optiplex 320's do not appear to like any DDR2 over 5300. DDR2 6400 will give this error.
The posts you have answered are more than two years old, surely by now, the issue has been resolved.
I am locking this thread.