I've been hearing via semi-trusted sources that the Dell BIOS team has been beefing up allowable RAM capacity (in Latitude D Series) and I was wondering if perhaps the Opti 745 USFF might be getting a bump in RAM capacity via a BIOS update.
The non-ultra-small-form-factor Opti 745s have always supported 8G on four DIMMs but the USFF has only two DIMM slots so the published RAM capacity for the 745 USFF is 4G. I have 4G now, but I'd consider going to 8G on two DIMMs (Yes, I'm running Vista 64-bit) if someone might comment on whether the BIOS would support 2x4G DIMMs. Or, perhaps they've always supported 8G but no 4G DIMMs were available when the computer was released. I just don't have RAM sitting around test these things.
Thanks for any advice, comments, and/or especially expertise and experiences that you can provide.
Zalman Z9 Plus • Asus P8Z77-V LGA 1155 Intel Z77 HDMI SATA 6Gbs USB 3.0 ATX • Intel Core i5-3570K Ivy Bridge Quad-Core 3.4 MHz (3.8 Turbo) • Seasonic SS-460FL2 460W Fanless 80Plus Power Supply • Scythe SCMG-300 120mm Heatsink • 8GB Corsair Vengeance 240-pin DDR3 SDRAM 1600 PC3-12800 • 128GB SATA III Samsung 830 SSD • Microsoft Wireless 2000 Keyboard • Microsoft Wireless Laser Mouse 7000
Don't hold your breath on a BIOS update for a couple of reasons.
1) The board limitations themselves. The USFF chassis not built to be a high end heavy RAM system, thus only two slots
2) The system itself rolled live back in 2006. Dell is moving to a new line of systems (160, 360, 960, F! 160) which are shipping now, so the R&D will be for those.
I can't think of a reason you could not slot to 4GB sticks using a 64 bit OS, so give a shot and report back. Worst that happens is the system fails to POST and you revert back the RAM.
*cough* shuffles feet, looks around.
If I had a couple of 4G sticks just lying around my office I'd try it but I don't feel comfortable purchasing them without knowing if they'll work or not. I'm going to guess it won't work because of board limitations. Thanks for the insight and for taking the time to respond.
2 4gig modules...hummmm first they can't be 800mhz modules as the 745 manual clearly states that there not compatible.That leaves pc2-5300 modules,not sure if they make 4 gig modules,but my guess is that they would not work....kinda like putting a corvette engine into a pinto...
Dell Optiplex 755 USFF 4Gig Ram,500 Gig HD,E-8400 C2D Cpu,AIO Monitor Dell 2007wfp
Windows Vista Ultimate 64 Bit.
I have a dell Optiplex 475 tower & i see this data below a post;
Antec Nine Hundred Two • Asus P5N-D LGA 775 65W ATX • Intel Pentium DualCore E5400 2.7GHz Wolfdale OC @ 3.11GHz • Xigmatek 92mm Rifle Heatsink • 2GB Mushkin Silverline DDR2 800 PC26400 • 2.5TB Internal HDDs • 1.5TB External HDDs • ATI Radeon 4650 512GB • LiteOn DVD+/-RW • Dual Dell U2410 Monitors ea @ 1200x1920 TrueColor Portrait @ 60 Hz • Dell Slim USB keyboard
Is there a scanner that gives this detailed info including RAM data w manuf & speed ?
Or can i get this data from my machine (Windows 8Pro) ?
Thanks 4 the help