Dimension E521, Bios 1.1.11
AMD 64 X2 6000+ 125 W, Clocked to 3.2 Ghz
2 GB RAM, PC-6400 (which gives a nice performance boost over PC-4300)
2 HARD DRIVES, 160 GB + 500 GB
RADEON HD 4870 Graphics card, Clocked to 800/1100 (4400)
620 W MODULAR PSU
My E521 has been very reliable and it has served me well. With some case modifications and new components, I am able to run an overclocked 6000+ cpu and a 4870 graphics card in my system (a strip of the case needs to be removed in order to fit dual-slot cards, see photo). I found a great replacement cpu cooler for the E521: Noctua NH-U9B
After playing Crysis (1680x1050, gamer setting, shaders/post-processing set to mainstream) the cpu temperature never exceeds 40 C (with fan). Without the cpu cooler fan running, the cpu temperature reaches 52 C. The Noctua is very effective, it fits nicely in the E521 due to its moderate size and installation is quite easy with some adjustments (see photo).
Have a look at the accompanying pictures of my computer:
Nice rig you got there, and great news that i can change the cooler of my e521!
Going to buy the new cpu cooler ASAP, then my Ati Sapphire 4850 will finaly fit !
But i have a question, what do you mean with : 'Use two mounting brackets' ?
@ this photo , http://img362.imageshack.us/img362/4920/hs2hb5.jpg
Gr, Bart (from holland ! )
The mounting bars fit the Dell motherboard with some adjustment (bending and shortening them with pliers). But the distance between them is longer than it would be on most motherboards. The regular installation will not fit, the heatsink with mounting brackets will not reach the mounting bars on the Dell board. I solved this problem by connecting two mounting brackets on top of each other on each side of the heatsink. (I also had to bend them somewhat to screw them on to the mounting bars). I only used parts included with the cooler.
So everything you need (except for the tools, and some bending 'skills') was included with the cooler?
My rig btw,
Dell Demension e521
Amd x2 5000+ @ stock speed (2,6Ghz)
4GB Team Elite 800Mhz RAM
(for the moment) 8600GTS OC (going to be the Ati 4850)
320GB Intern, 160 GB Extern
2 80MM out-take fans
OCZ StealthXtreme 600 Watt
And thans for the quick respons !
Hi, thanks for the quick respons!
So if I understaind correctly, everything you need (except for some tools and bending 'skills') is included with the cooler ?
Amd X2 5000+ @ 2,6Ghz
4 GB Team-Elite PC6400
(for the moment) 8600GTS OC
320GB intern HDD, 160GB extern HDD.
OCZ 600 Watt
2 80mm out-take fans.
Greetings from holland, Bart.
So if I understaind
correctly, everything you need (except for some tools and bending
'skills') is included with the cooler ?
You just need a screwdriver, a pair of pliers and; 2 screws, 2 washers and 2 nuts (http://img87.imageshack.us/img87/2507/scvz9.jpg)
to put the two mounting brackets together.
Hi, thanks for the quick respond!
Allright, so if I understaind correctley, everything (except tools and bending 'skills') is included with the cooler,
needed to get it on the dell mobo?
My system btw,
Amd x2 5000+ 2,6Ghz (stock speed, no bios updates done yet, so no over clocking ..)
4 GB Team Elite PC6400
GeForce 8600GTS (going to be a Ati HD4850!)
OCZ StealtXtreme 600 Watt
Greetings from Holland, Bart.
Strangly i cound't post a reply last night, i think the dell forum was down or something like that.
Anyway, thanks for the info again !
So if I understaind correctly, everything I need (except for some bending 'skills' and a pair of pliers) is included with the cooler?
My system :
Amd x2 5000+ @ 2,6Ghz (no bios update done yet, so no overclocking)
(for now) Geforce 8600GTS OC (going to be a Ati 4850)
320 + 160GB HDD
2 out-take fans on the back
OCZ StealthXtreme 600Watt
Greets from holland, Bart !
EDIT: Holy , my messages got posted like 4 times! Oops, sory!
I know. Every time I try to post a message, I receive an error message. MY MESSAGES GOT POSTED ANYWAY, so I posted my first message three times... (how do you delete posts?)
Yeah, you got it.
BTW: The Dell motherboard uses a non-standard 5-pin connector for its case fan.
Anyone using this cooler with the E521 basically have three options regarding the cpu cooler fan (I have used both 1 and 2 myself):
1) Connect the cpu cooler fan to the psu
2) Not use the fan (My overclocked 6000+ 125 W barely reaches over 50 C, this option should work for most systems)
3) Connect the cpu cooler fan wires to the dell 5-pin connector and connect it to the motherboard (losing the case fan)
Remember to clean the cpu and apply thermal compund before installing the cooler/heatsink.
I noticed the 5 pin fan connector on the motherboard, i want to keep the case fan, so I will connect the fan of the cpu cooler to the psu.
One last question, is there a thermal compound/paste included with the new cooler?
(and I don't now how to delete the post, i've been looking for it myself aswell )
Yes, thermal compound is included with the cpu cooler.
BTW: I forgot something that might be worth mentioning (I did this a while back for a previous upgrade - installing a 8800GTS):
To fit dual-slot cards inside the E521, one row of the motherboard heatsink needs to be shortened:
Again, use a plier/cutter and shorten the bottom row of the board heatsink about 1/3.
Thanks, i was planning to do so, because otherwise my 4850 won't fit, thanks for the picture =)
This wont affect the heat of the (northbridge?) chipset?
No, I have seen no adverse effects from reducing the system board heatsink.
Best of luck with your upgrade!
Thats good to hear, thanks again for all the info! =)
I'm also planning to cut out the dell logo, place plexiglass behind it, and pout a cclf above it, that must look nice i think.