I have a Dell Inspiron 660 desktop computer. I want to know how to remove the side panel, so I can install a video card. I also need to know what form factor the power supply is, I will also be upgrading it to. Thanks in advance Paul
The Dell Inspiron 660 Mini Tower can use generic standard ATX power supply units, with either a 24-pin or 20+4-pin main motherboard power connector, with or without the on/off switch.You should be able to buy a compatible power supply from either a local or online computer store.Note: You require a power supply with four SATA power connectors.
The instructions for removing and replacing the Inspiron 660 MT side panel/cover, are here:
If my answer was helpful, please use the 'Did this answer the question' and click: YesForum Member since 2001I am not employed by Dell
Which Card you can use will depend on how wide and tall it is. If you have a 660S you are very limited in which cards fit and they must be
LOW PROFILE. The 660 Mini tower can only take single wide cards.
Removing the Computer Cover
NOTE: Ensure that you remove the padlock from the padlock rings, if applicable.
1 Lay the computer on its side with the computer cover facing up.
2 Using a screwdriver, remove the screws that secure the computer cover to
3 Release the computer cover by sliding it away from the front of the
4 Lift the cover away from the computer and set it aside in a secure location.
Report Unresolved Customer Service Issues here I do not work for Dell. I too am a user. The forum is primarily user to user, with Dell employees moderatingContact USA Technical Support
Get Support on Twitter @DellCaresPro