Need SATA hard disk driver to install windows XP on opitplex 3010 and 7010. Cannot see suitable sata driver in dell support software. Can anyone help please?
For 3010's with MBR where xp is to be installed as a second independent os to W7, there's no need to change the bios ata/ahci setting, leave it at ahci. Just use nLite (free) to create an xp install cd with Intel sata drivers included, and install to a fresh partition as normal, no floppy is needed. Repair the installation as necessary to get the dual boot menu. My 3010 uses Intel series 6 chipset for which intel provide the necessary f6 sata drivers.
I would like to check if you are trying to install Windows XP on Dell OptiPlex 3010 and 7010; and you are able to find the hard drive while performing the operating system installation.
You will not be able to find the hard drive because of the SATA mode in the BIOS on your computer will be on ‘AHCI’ mode you will have to change it to ‘ATA’ mode and then perform the operating system installation as Windows XP does not support AHCI mode.
Please let me know if this helps
Thanks and Regards,Ravi Chandra BCSocial Media and Community ProfessionalOrder Status : http://dell.to/1fgKSTrDownload Drivers : http://dell.to/1hcxG98
Okay. I forgot to say its a dual boot optiplex with preinsalled win7 and my own XP added on after.
1 Are you saying that I don't need a sata hdd driver to install XP?
2 Once the install is completed, can I then permanently switch bios back to AHCI and use win7 or XP without having to change it again?
To use XP and Win 7 in dual boot system I definitely need a Sata hdd driver for installing and running XP. Is there one for hte optiplex 3010 or 7010 systems please, or not ?
There are but you cant have your cake and eat it too.
You would have to use MBR partitions (LEGACY ATA) not GUID partitions.
ATA not AHCI
Also you cannot have XP and 7 Reside on the same Volume you would need to split partitions.
Too many incompatible overlaps in C:\windows and C:\windows\system32
Dual booting is Not supported.
188.8.131.522, A00 6/4/2012 5:30:54 AM
Microsoft Windows 7 32-bit
Microsoft Windows 7 64-bit
Microsoft Windows 8 32-bit
Microsoft Windows 8 64-bit
Microsoft Windows XP
Microsoft Windows XP x64
During the text-mode phase of the setup process, Windows pauses briefly and prompts you to press F6. This option is displayed in the status line and lets you use an OEM mass storage controller driver. The F6 option is provided strictly as a means to install OEM drivers for mass storage controllers only. This is required to let the installation of the operating system continue. Microsoft does not support using F6 to install any device driver other than mass storage controller drivers.Note Mass storage controller drivers can be loaded only from floppy disks by using the F6 key. The F6 key cannot be used to load drivers that are stored on USB flash drives, on USB hard disks, or on other external storage devices.
Report Unresolved Customer Service Issues here: Dell - Unresolved Customer Service IssuesI do not work for Dell. I too am a user. The forum is primarily user to user, with Dell employees moderating.
Thanks for that.
The 3010/7010 is for home use. I want to make a streamlined XP install disk using a sata driver (like I did for my lenovo laptop which has win7 on it). Bios will be set to AHCI and left there. XP will be on its own partition. Which driver file should use, It can't be that hard can it ??!!!
Should I use a 390/790 instead?
The 3010 I received via Outlet has MBR partition style. Intel provide f6 sata drivers for the 3010 chipset which can be slipstreamed into an XP installation. Thank you Intel.
Does this driver need to be installed?
I have the bios switched to ATA and when I try to install this driver it gives a "This computer does not meet the minimum requirements for installing the software." error message.
I was able to install all of the other updates. This is the only one that fails.
I bought 12 new Optiplex 3010's last week. I was trying to create a driver file on a floppy disk to load using F6 with XP (install other drivers). The ATA mode allowed XP to install. I was going to change this setting, but this answer saved me valuable time in not having to test diiferent methods of getting XP on these machines. Thanks a bunch!
Thanks man really u saved me from buying another hd
thanks man it helped so much