1 Rookie
•
6 Posts
0
22
Precision Tower 3640: optional IO-card part-number/where to find?
I'm using the 3640 with integrated Intel graphics, which only has display-port connectors.
The service-manual shows an "optional IO card" that adds HDMI and VGA connectors.
Does anybody know what the part number of the "optional IO card" is?
Where can I find it in Europe/Germany?
Would prefer this card over a new graphics-card or a DP to HDMI/VGA adapter cable.
redxps630
7 Technologist
7 Technologist
•
10.4K Posts
1
April 2nd, 2024 13:48
“You may see one of these cards-HDMI/DisplayPort/VGA/Type-C based on the additional component you may have ordered with the system”
find these part number in 3640 XE, 3650, and 3630, probably c/w 3640.
Additional VGA Port
OEM Dell Precision 3630 HDMI Connector Board 93MKV and Cable 6X5D9
Additional HDMI 2.0 Port
Dell P/N: P227W. OEM Dell Precision T3630 T3640 T3650 Display Port W Cable 9RVWH
(edited)
DELL-Chris M
Community Manager
Community Manager
•
54.3K Posts
0
April 2nd, 2024 16:40
I found in SPMD. All listed as "For Sale: No" =
93MKV = R4GGF Pegatron HDMI daughterboard (Precision 3630/3640/3650)
6X5D9 = TMY9V Pegatron HDMI daughterboard (Precision 3630)
Qbertoni
1 Rookie
1 Rookie
•
6 Posts
0
April 2nd, 2024 16:11
I'm looking for a HDMI connector, so 93MKV and 6X5D9 would be OK. But they are specified for the Precision T3630, not sure they will work.
redxps630
7 Technologist
7 Technologist
•
10.4K Posts
0
April 2nd, 2024 16:14
@DELL-Chris M
do you know if the hdmi optional card and cable are c/w Precision 3640?
redxps630
7 Technologist
7 Technologist
•
10.4K Posts
0
April 2nd, 2024 16:52
you have a 3640. Just compare the Optional card socket w 3630 motherboard card socket (here is a good pic
https://www.ebay.com/itm/165933667612?)
they are highly likely to be the same. Thus the 3630 hdmi cable likely fits 3640
Qbertoni
1 Rookie
1 Rookie
•
6 Posts
0
April 2nd, 2024 17:45
The "option card" interfaces look identical.
I found some offers for this card/cable in the US, but no shipping to Europe offered (would be too expensive anyway).
I try to find it somewhere in Europe. Will report if it's a success.
Thank you for your help.
(edited)
Qbertoni
1 Rookie
1 Rookie
•
6 Posts
0
April 13th, 2024 10:34
Just installed the HDMI-Bord 93MKV with cable 6X5D9: it works.
Bought it used at Ebay-UK. I needed 4 screws M3x3mm to install the board, screws where not part of the delivery.
(edited)