Unsolved
1 Rookie
•
2 Posts
0
26
Upgrade R510 from PERC 6i to H700
Have an 8 bay R510 with a PERC 6i Raid card in it. Bought an H700 to allow it to use drives larger than 2TB, but after plugging the card into the riser, and connecting the cables, it doesn't see any physical drives.
The only thing I notice is that the 6i had an extra little 4pin cable which ran from the riser to the 6i. The H700 doesn't have anywhere to plug this cable.
Anyone managed to do this upgrade successfully?
DELL-Young E
Moderator
Moderator
•
3.7K Posts
0
April 9th, 2024 09:08
Hello this may help:
https://dell.to/4d3gy47
https://dell.to/3TPVuoO
Dell PowerEdge Raid Upgrade- Perc 6i to H700
Respectfully,
CyberprotectorTO
1 Rookie
1 Rookie
•
2 Posts
0
April 12th, 2024 15:12
@DELL-Young E that video is for an R610, I have an R510. The other link talks about importing foreign config, but this server is not even seeing any physical drives connected to the H700
DELL-Charles R
Moderator
Moderator
•
3.3K Posts
0
April 12th, 2024 17:16
Hello,
These are the R510 PERC H700 cables:
Part Number
Part Description
Functional Description
CABLES AND CORDS
P744P
ASSY,CBL,PERC7,S4,8HD,2,R510
Cable Assembly - H700 Riser 1 To backplane 2 (for Mack 8)
Y673P
ASSY,CBL,PERC7,S4,8HD,1,R510
Cable Assembly - H700 Riser 1 To backplane 1 (for Mack 8)