Unsolved
5 Posts
0
23
Replacing the failed RAID 0 hard drive.
Hello Dell,
I am currently using a PowerEdge R530 server with a 240GB SSD configured in RAID 0 for data storage. Unfortunately, this hard drive has failed, so I replaced it with another similar drive. However, in the management interface, I only see this drive in a 'ready' state, not online. Therefore, I would appreciate Dell's support in guiding me through the process of replacing this drive to make it usable.
Thank you.
DELL-Charles R
Moderator
Moderator
•
3.3K Posts
0
March 12th, 2024 12:53
Hello,
Can you check during POST you can enter the PERC controller BIOS <CTRL+R> and create your RAID0?
Praveen.Singh
3 Apprentice
3 Apprentice
•
406 Posts
0
March 18th, 2024 06:40
Enter into the Raid BIOS from POST by Pressing H or R when prompted and then create raid 0 if you need further help let me know.
https://www.dell.com/support/kbdoc/en-in/000183636/poweredge-how-to-configure-raid-with-device-settings-lifecycle-controller
https://www.youtube.com/watch?v=I1NZKtkW54U
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!