Unsolved
2 Posts
0
24
RAID level migration from 0 to 6 on Dell PowerEdge R620
I have a bare metal backup server with Windows Server 2016 and Veeam Backup and Replication installed. It's being used to backup vSphere VM's. The issue is that it was setup as RAID 0. Four SATA HDDs (4 TB each) made into one virtual disk. I want to change the RAID level to 6 on that virtual disk. It has PERC 710 Mini (embedded) controller.
Is it possible to do a RAID level migration without losing data? or do I have to delete RAID-0 virtual disk and recreate RAID-6, install Windows server and setup backup again?
DELL-Young E
Moderator
Moderator
•
3.7K Posts
0
January 29th, 2024 02:54
Hello, thanks for choosing Dell. Would this help? Let us know if you have any further questions.
https://dell.to/3vVxRTy
Respectfully,
flight0643
2 Posts
0
January 30th, 2024 21:52
The article you linked has this note:
DELL-Young E
Moderator
Moderator
•
3.7K Posts
0
January 31st, 2024 01:01
Hello yes it's possible on both iDRAC 7 and PERC 710 Mini. However, please note this has to be done on OMSA.
Respectfully,