Search Results (87.2K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hello everyone. Our switch has expired. And I found 3 old model switches. Cisco SG2000-26, LINKSYS SGE2000 and a DELL PowerConnect 2824. We will use these 3 switches in our office for a temporary period. Then we will replace them with the latest CISCO Small Business switches. We know about networkin
Question
•
Networking General
Community Accepted Solution
Hello, I want to buy this monitor from Dell USA. My question, is it covered by an international warranty? Thanks.
Question
•
Customer Care
Community Accepted Solution
Is the Kingston FURY Beast 16GB 3200MHz DDR4 CL16 PC4-25600 (DDR4-3200) a compatible memory module for my 2016 XPS 8910?
Question
•
XPS Desktops
Community Accepted Solution
Recently added a second CPU to this server. I went with the Xeon E5-2640 v4, but after installing the heatsink and powering it back up, I get hung up on this screen. Any ideas on what is causing this?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi there, The same question was asked almost three years ago, so I'm just checking if storage container-level snapshot, immutable snapshot, and restore features are available in recent versions (3.5 and 3.6). If not, is there any roadmap for implementing this functionality? Thanks,
Question
•
PowerStore
Community Accepted Solution
We have a T310 PowerEdge Server, with this PCIe slots free: 2 x8 1 x4 2 x1 We need to install an PCIe board with 2 SSD slots, to make an RAID -1 system of SSD disks. But all of this card require Bifurcation support on PCIe slots. Any of the PCIe slots support bifurcation? Thanks Wladimir Estrag
Question
•
PowerEdge Hardware General
Community Accepted Solution
I'm seeing this message in the Hardware Log on my server. I saw in another post that it might be a driver issue. Any thoughts?
Question
•
PowerEdge Hardware General
Community Accepted Solution
I recently received a new Dell Latitude 5530 (2023 model), running Win 11 Pro. I use Macrium Reflect software to do image backups, and one of the first things they advise is to create rescue media and make certain you can boot from it. I used a USB flash drive to create the media, but was not
Question
•
Latitude
Community Accepted Solution
After reading https://arstechnica.com/security/2024/04/supply-chain-snafu-causes-intel-and-others-to-ship-hackable-hardware-for-5-years/ and the associated articles, I am curious to know if my T340 has an exposure. Am I worried about it? No, not really however if the main board does have an exposur
Question
•
PowerEdge Hardware General
Community Accepted Solution
When I start the support assistant to check and install updates and it hangs at the start and does not go further. I have uninstalled, downloaded latest version (which I already had) and installed that and got the same problem. I tried contacting Dell support but got a dead end as my laptop is not i
Question
•
SupportAssist for PCs
Community Accepted Solution
I recently took over IT for a small school that is running a used PowerEdge R320 running Windows Server Core 2016. For the first couple months everything was running just fine. When I came in one day, I could hear from a few rooms away that the fans were running at full speed on the server. I am not
Question
•
Power & Cooling
Community Accepted Solution
Greetings to everyone! My Precision 3650 MT has a 300w power supply (model CN-0X7CXN-ABW00 300W 80 PLUS GOLD -I will provide a photo of it). I upgraded the CPU from a 65W i5-10600 to an i7-11700 (65W also) and it all seem to work ok, except when I connect external hard drives to the system I notice
Question
•
Precision Fixed Workstations
Community Accepted Solution
I own a alienware m17 R1 I got from my family who used it for a few years already, I'm aware that its not new and its performance might not be the best, but I do not expect it to be this bad, since its just a few years old. I first ran doom 2016 with it, it has high fps at the menu but once i get in
Question
•
Alienware
Community Accepted Solution
Hi good morning, afternoon, evening, I have a question, I'm currently using a Dell Precision Tower 7810 with a 0KJCC5 motherboard, i would like to upgrade my cpu (Intel Xeon E5-2609 v3) to a (Intel Core i7 6850k) I investigated quite a lot and received useful information but I still have some questi
Question
•
Precision Mobile Workstations
Community Accepted Solution
I just bought an R12 on Ebay. The current bios is 1.1.24 and my bios is 1.1.4 so I'm wondering if I should even attempt to install it? I've seen recommendations that I should install all the old ones in order but that's like around 15 or so bios updates, each one fraught with the possibility of bric
Question
•
Alienware Desktops
Community Accepted Solution
I previously posted about a dead D: Drive. This has been replaced with a new one. I had the computer working fine for about a week, now it won't boot to C: Drive SSD. I have disconnected the D: Drive and have run diagnostics. I ran ePSA and it did not report any errors. It has attempted repairs. Wh
Question
•
XPS Desktops
Community Accepted Solution
I have had an Alienware x17 R1 for a little over two years and before now, it has been flawless. Approximately two months ago, I started getting blue screens every 1-3 days. I am an IT guy by profession, but I haven't been in Desktop Support for many years and I am a bit rusty. I tried to analyze
Question
•
Alienware
Community Accepted Solution
Hello, I created a windows 11 gold image on a VM. However, after the image restoration, the Startup settings were missing from the recovery mode. I checked the VM and confirmed the startup setting is available. The problem occurred after restoring the image. Has anyone experienced this problem bef
Question
•
Image Assist
Community Accepted Solution
Hello all, I started noticing my fans were getting louder on my laptop (Dell XPS 15 9570) once I started using my VMs again after not needing them for a couple years. Then, I started getting the a "Critical Error Message" on boot up after the computer ran diagnostics. The error was "Fan - The (Proce
Question
•
XPS
Community Accepted Solution
Hello , When i try to access to alert policy menu in openmanage , i receive a error.This is happend since i have modify one alert policy. ( in the message area ) How can i list and/or remove a alert policy in CLI or other ? Best regards
Question
•
Dell OpenManage Enterprise